LumberJocks

need 16/4 maple studs for stereo rack, where can I buy in the sacramento area?

  • Advertise with us

« back to Wood & Lumber forum

Forum topic by berlinguyinca posted 524 days ago 1426 views 0 times favorited 9 replies Add to Favorites Watch
View berlinguyinca's profile

berlinguyinca

21 posts in 625 days


524 days ago

Topic tags/keywords: maple 4x4 164 stereo rack

dear all,

after about a year of practicing and getting my feets wet with attempting to woodwork, I’m finally at a point were my tools and skills are ready to be challenged by my first piece of furniture.

Now while browsing the internet for idea’s of stereo shelves, I found the following and rather like the idea and implementation of it:

http://www.stereophile.com/content/diy-audio-rack-progress-not-flexy-1

And looking at the rack, I assume it to be 16/4 maple on the sides and otherwise mostly 8/4 and 4/4.

Height wise I’m shooting for about 3-4 feet. Still haven’t received the stereo components to finalize this.

Does anybody know, where I can get this form of lumber in the sacramento/woodland/davis area? For a decent price.

I’m hoping for 2s square. Since I have nearly all the tools to build it. Besides a jointer, but a buddy has one and I hope to borrow it from him for this project or order a table top model from jet. Just running out of space in my garage…


9 replies so far

View BentheViking's profile

BentheViking

1746 posts in 1161 days


#1 posted 524 days ago

could you laminate 8/4s together?

-- It's made of wood. Real sturdy.--Chubbs Peterson

View berlinguyinca's profile

berlinguyinca

21 posts in 625 days


#2 posted 524 days ago

yes this would be possible, but might not look as nice. Would be a worse case call.

I’m also still searching for alternative woods. Which are cheaper and can handle the weight of 2 Amplifiers (80lbs each), preamp/cd/dac at 10-20lbs each and a turntable later which is around 30lbs.

Maple is around ~4$ a BF 2S

View Loren's profile (online now)

Loren

7230 posts in 2245 days


#3 posted 524 days ago

Looks closer to 10/4 to me.

16/4 hardwoods are difficult to come by in California.

Bohnhoff Lumber is the source I use in Los Angeles -
they supply many of the other hardwood dealers
in the area. For all I know they may supply the
dealers in your area as well.

If you are set up for resawing, it’s not too much trouble
to face veneer the posts in fancy maple and use
a cheaper glued-up hardwood core.

-- http://lawoodworking.com

View lumberjoe's profile (online now)

lumberjoe

2827 posts in 846 days


#4 posted 524 days ago

I would laminate for the sake of dimensional stability. Lock mitered legs would look better than solid maple in my opinion; the grain would be contiguous rather than having flat grain/edge grain

-- www.etsy.com/shop/KandJWoodCrafts

View berlinguyinca's profile

berlinguyinca

21 posts in 625 days


#5 posted 524 days ago

thanks

now 10/4 makes it easier and a lot cheaper. In the worst case I could use 8/4 maple and ‘wrap’ it with another hardwood of 1/4 on each side. Since I plan to make the mortise 1/2” to 3/4” deep it should not affect the stability.

View berlinguyinca's profile

berlinguyinca

21 posts in 625 days


#6 posted 524 days ago

mhm lock-miter a technique I don’t know yet, more to learn again…

View Dark_Lightning's profile

Dark_Lightning

1667 posts in 1706 days


#7 posted 524 days ago

There are a few MacBeaths near you, think. http://www.macbeath.com/

I used to buy wood from them when I was in the US Navy, in the mid- ‘70s. Stationed in Oakland.

View berlinguyinca's profile

berlinguyinca

21 posts in 625 days


#8 posted 524 days ago

thanks they look good and have decent prices,

do you think poplar is strong enough for an audio rack? Still rather new to picking woods and since it’s going to be stained anyway to match our other furniture.

View rockindavan's profile

rockindavan

283 posts in 1233 days


#9 posted 524 days ago

Any wood will be plenty strong. The joinery is going to be the source of failure in nearly every case.

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase