Armoire #1: Building an Armoire
I skipped a few steps up to this point. Basically I built 3 cabinets and screwed them together and here I’ve clamped on the face frame. Can’t have too many clamps…. After the frames were dry I glued a plywood finished end on each side and attached the raised panel columns to the face frame. Built a plywood top to match the profile of the cabinet and wraped it with an applied molding. Then add a structure that will support the arched middle section that I’ll be building next I made these pieces by running them accross this very old saw with an even older 14” blade… I can’t remember how many passes it took. Quite a few thoug...
