zer0bot's Favorites

  • Advertise with us
View Gord Graff's profile

Fast & Simple Biscuit Joiner Jig. PICS

10-01-2007 11:41 AM by Gord Graff | 9 comments »

Hi All, Like most woodworkers, I embraced biscuit joinery many years ago and like most woodworkers, I never seem to have enough flat usable space to register the joiner off of when joining ¾” material. Using my bench as a flat surface to register my biscuit joiner off of is a crapshoot most days as it is covered with dried on glue drops and whatnots. My solution to this has always been a simple modified bench hook that serves a number of biscuit joinery scenarios. Not only does this jig...

Read this entry »

View scrappy's profile

Making A Segmented Ring Without A Lathe / A Step by Step Tutorial

06-07-2009 09:15 PM by scrappy | 36 comments »

Well, I was asked to put together a blog on how I made my segmentd ring. Since I had to make a new one for myself, (first one too small) I thought I would go ahead and do a step by step picture tutorial. My first time ever doing something like this , so hope it comes out OK. Here goes; Wood Selection The first step in making the ring is deciding what woods to use. As we all know, the selection is quite large. One of the most important things is color, but the most important is hardne...

Read this entry »

View Dick, & Barb Cain's profile

Casters on my Rikon bandsaw!

09-30-2008 12:24 AM by Dick, & Barb Cain | 15 comments »

I’ve been checking out mobile bases for my bandsaw, & decided to just put casters on it. I checkout the base of my bandsaw, & I decided it was built plenty strong enough to handle the casters. That’s all I had to do was cut some 1” x 2” x 3” blocks to fit in corners between the channel cross members. I drilled some 1/2” holes in towards the cabinet, so the large flat fender washers would fit. The reason I used fender washers, was to prev...

Read this entry »

View MOJOE's profile

Router Table for Ridgid Tablesaw

06-16-2009 05:43 PM by MOJOE | 7 comments »

Well, first off, this is my maiden voyage for blogging. Hope it works. I will basically detail the construction of my router table that is built into the fence rail system of my Ridgid tablesaw. Here goes…...I started by purchasing an 18”x30”x5/8” piece of baltic birch plywood from WoodCraft. I then cut that piece to 15”x27” which fits inside my rails snugly. Next I attached some red oak strips to the outside edges and back with some glue and later s...

Read this entry »

« prev 1 2 3
24 entries

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics