Changing Blades with a Laguna Tools Drift Master Fence #2: Changing Blades with a Laguna Tools Drift Master Fence
(To continue from my last post #1). I see from the comments of my first post many of you have run into this problem of getting the doors open when changing blades. So after much research and trying every thing here are the best methods I have come up with. The first way, which many of you probably know from talking to a Laguna Rep is to tilt the table. That will allow you to get the bottom door past the fence so you can get it open to change your blades out. The Second way, which is my favorite, is to slide the fence all the way over to the blade. Then loosen the wing nuts on the yellow blade guard under the table. With the wing nuts loosened the yellow blade guard will drop down an...
