| Blog series by woodspar | updated 2129 days ago | 2 parts | 12492 reads | 17 comments total |
Part 1: Introduction
This blog will be about little stuff that I do to make my experience in the shop a little better. I will post jigs that I make, changes that I make in the organization of the shop, and shop “helpers” – stuff that is not quite a tool and not quite a jig. I hope you find something here that you like. Enjoy!
Part 2: Box Fan Dust Filter
Just built this quick project from an article in “Woodsmith” magazine. I made a few changes from the article. There were incorrect measurements in the exploded drawing in the magazine. For example, the top piece was labeled 21.5 inches, when it clearly needed to be 20.5 inches, like the bottom piece. When I determined that some measurements where reported incorrectly, I gave up on reading the plan in the magazine and I started making some changes to t...
