My Bunk-bed project

  • Advertise with us
Blog series by woodshopbob updated 11-11-2007 03:26 PM 6 parts 12141 reads 14 comments total

Part 1: Bunk bed

10-06-2007 04:59 AM by woodshopbob | 5 comments »

Well here goes another project! My oldest daughter asked if I could make the granddaughters a bunk-bed. So as usual dad is up to the challenge!! After three days of looking on the Internet for different bed styles I picked the one pictured below. We all approved this bed as the one best fit to the girls. So I purchased 6- 4×8 sheets of cabinet grade birch ply, 2- 4×8 sheets OSB, 1- 4×8 sheet Masonite board. We also bought several wood drawer pulls. The picture you see sh...

Read this entry »

Part 2: Main upright mods

10-12-2007 12:12 AM by woodshopbob | 3 comments »

Well the closet & desk end mods are built (except for drawers). These pictured are just the basic structures. I am currently working on the drawers & man what alot of peices (5 for each drawer total of 8 drawers).

Read this entry »

Part 3: Drawers

10-17-2007 04:06 AM by woodshopbob | 2 comments »

Well all the drawers are done! They were very time consuming even though the pocket screws made this process a lot easier. Rather than use metal drawer slides ( WHICH ARE OUTRAGEOUS IN PRICE $13 SET ) I dadoed the sides to run on some hardwood runners using wood dowels as stops. There are a total of 8 drawers. And believe it or not every drawer ended up square each time I assembled one!

Read this entry »

Part 4: Edge banding

10-17-2007 04:16 AM by woodshopbob | 1 comment »

If anyone has any tips on iron on edge banding for plywood I would like to hear from you. I have had some problems in the past with adhesion and do not want to develop problems on this project.

Read this entry »

Part 5: Desk end mod & closet end mod

10-19-2007 04:22 AM by woodshopbob | 2 comments »

Well the end mods are put together! I still need to final sand and band all the exposed edges.

Read this entry »

Part 6: getting there

11-11-2007 03:26 PM by woodshopbob | 1 comment »

Sorry all I have been working some long hours & not had time to hit the shop much. But everything is banded & I am sanding away! Hope to post some full assembly pics you can see.

Read this entry »

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics