LumberJocks

How to Generate YouTube embed codes and add a video to your post

  • Advertise with us
Blog entry by woodshaver Tony C posted 05-27-2017 11:21 AM 4480 reads 4 times favorited 19 comments Add to Favorites Watch

.

Code Generator >>>> http://www.gorissen.info/Pierre/files/YouTube_code.htm\
.

1st follow these instructions below
.

.

Open the code generator and past your copied partial URL in the top field
There are 4 choices to copy. Just choose one of them!

Code Generator >>>> http://www.gorissen.info/Pierre/files/YouTube_code.htm

Click on the code you want and it should highlight (blue), then right click and choose copy.

Now go to your Lumberjocks page and right click in the area that you type you project description and past the code there with that right click.

Then click Preview to see if it worked for you.
.

.


.

It’s really not that complicated to do. Give it a try!

-- St Augustine FL, Experience is the sum of our mistakes!



19 comments so far

View Jim Jakosh's profile

Jim Jakosh

21743 posts in 3309 days


#1 posted 05-27-2017 11:44 AM

Hi Tony. I guess I don’t understand the need for a code?

When I make a video on You tube and want to put it into a Lumberjocks topic, I open the video on You tube, copy the address at the top and paste it into my post on LJs .

What is the advantage of using the code?

Thanks, Jim

-- Jim Jakosh.....Practical Wood Products...........Learn something new every day!! Variety is the Spice of Life!!

View CFrye's profile

CFrye

10487 posts in 2043 days


#2 posted 05-27-2017 11:53 AM

Using the code means the video appears in your post without having to go to YouTube to watch, Jim. Many folks will not click on a link.
Thanks for the reminder, Tony.

-- God bless, Candy

View  woodshaver Tony C   's profile (online now)

woodshaver Tony C

6229 posts in 3556 days


#3 posted 05-27-2017 11:54 AM

Hi Jim,
With the code you can see the video on your LJ’s post along with a link to also view it on YouTube if you wish. Just more toys to play with. Or you can just copy the YouTube address link as you mentioned and do it that way.
I should have added a bit more info to this! Still waking up! LOL!

-- St Augustine FL, Experience is the sum of our mistakes!

View  woodshaver Tony C   's profile (online now)

woodshaver Tony C

6229 posts in 3556 days


#4 posted 05-27-2017 11:55 AM

Thanks Candy! You explained that much better than I did! LOL!

-- St Augustine FL, Experience is the sum of our mistakes!

View doubleDD's profile

doubleDD

7896 posts in 2246 days


#5 posted 05-27-2017 01:17 PM

I wish I could get any video posted. I keep missing something every time I try.

-- Dave, Downers Grove, Il. -------- When you run out of ideas, start building your dreams.

View kiefer's profile

kiefer

5622 posts in 2870 days


#6 posted 05-27-2017 03:16 PM

Thanks Tony
I gave it a try but all I get on my post is the link what am I missing ?

Klaus

-- Kiefer https://www.youtube.com/user/woodkiefer1/videos

View steliart's profile

steliart

2851 posts in 2891 days


#7 posted 05-27-2017 04:48 PM

Never got into the videos as English is not my native language. I speak very well but for a video I guess I will need a script and it’s too much trouble…
Hey Tony how about going into old school silent movies :) hahahaha
Anyway, if and whenever I would like to make one, I’m sure you my friends here will guide me through it with your wisdom.

-- Stelios L.A. Stavrinides: - I am not so rich to buy cheap tools, but... necessity is the mother of inventions !!!

View htl's profile

htl

4238 posts in 1363 days


#8 posted 05-27-2017 06:34 PM

Thanks Tony I was needing this yesterday!!! LOL
Now I just need to study it, but! but!! yes I will learn this LOL!!!

-- An Index Of My Model making Blogs http://lumberjocks.com/htl/blog/116729

View htl's profile

htl

4238 posts in 1363 days


#9 posted 05-27-2017 06:41 PM


Or you can just copy the YouTube address link as you mentioned and do it that way.

- woodshaver Tony C

Funny this is what I did yesterday and Dutch said he couldn’t see it but I could click on it just fine?????
I copied from a couple other places and finaly got it up and running but will be learning the right way with your tips. Thanks!!!

-- An Index Of My Model making Blogs http://lumberjocks.com/htl/blog/116729

View  woodshaver Tony C   's profile (online now)

woodshaver Tony C

6229 posts in 3556 days


#10 posted 05-27-2017 08:47 PM

Dave & Klaus,

I’m not sure why this don’t work for you guys. Are you copying just the end of the URL address?
And then pasting it into the Generator? Then copy the code and paste that into where you type the description about your project. All you need is one of the codes there are 4 just use the top one.
Hope this helps!
.

-- St Augustine FL, Experience is the sum of our mistakes!

View BobWemm's profile

BobWemm

2557 posts in 2129 days


#11 posted 05-28-2017 02:02 AM

Well over the top of my DUMB HEAD guys, but thanks Tony for the info. Plus all you other Guys for your feedback.
Maybe one day??

Bob.

-- Bob, Western Australia, The Sun came up this morning, what a great start to the day. Now it's up to me to make it even better. I've cut this piece of wood 4 times and it's still too damn short.

View  woodshaver Tony C   's profile (online now)

woodshaver Tony C

6229 posts in 3556 days


#12 posted 05-28-2017 03:48 PM

Bob,

I know better and I’m sure everyone else here does too! I have see some very complicated project that you have created and posted here on LJ’s and most likely they didn’t come with directions on how to make them.

So with that said I know if you put your mind to it you could do this without a doubt! Besides last time I looked I don’t have any DUMB HEAD buddies! So there! :)

-- St Augustine FL, Experience is the sum of our mistakes!

View Roger's profile

Roger

20952 posts in 3007 days


#13 posted 06-04-2017 10:43 PM

Good info Tony. If I can remember it…. lol

-- Roger from KY. Work/Play/Travel Safe. Keep your dust collector fed. Kentuk55@yahoo.com

View Dan P's profile

Dan P

723 posts in 2095 days


#14 posted 08-26-2017 04:20 PM

Thanks Tony.


View on YouTube

Throat plate removed for demo purposes.

-- Daniel P

View htl's profile

htl

4238 posts in 1363 days


#15 posted 08-26-2017 06:29 PM

Thanks woodshaver and CFrye
I think what confused me was where’s the code generator file and now after going back and rereading every thing I see it’s at the top but to someone new to this [me] they will just skip over it and get last quite quickly.

I now see how it works and appropriate the help and it’s up in my favorites when needed.

-- An Index Of My Model making Blogs http://lumberjocks.com/htl/blog/116729

showing 1 through 15 of 19 comments

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com