woodcox's Blog

  • Advertise with us
This blog is written by woodcox | 1 entry so far

Latest Entry

easy trim router round tenoning jig

06-06-2013 04:14 AM by woodcox | 1 comment »

Here is what I came up with for making my version of this jig. The box is stainless steel channel that can be clamped to the bench. I used an inexpensive Central Machinery trim router mounted to the top. Depth of cut is about an inch and a half but could easily be up to three inches by repositioning the bar. I had an old magnetic dial indicator base that I took the post off to make up the bar positioning assembly. One end of the bar post is threaded which I simply located with a hole in the box off center a couple inches behind the bit cut intersection . I then drill a 5/16” whole longer than my tenon length in the end of most stock. I can then adjust tenon to fi...

Read this entry »

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

Latest Projects | Latest Blog Entries | Latest Forum Topics :: gardening showcase