EdsCustomWoodCrafts
EdsCustomWoodCrafts
  • Console Table #1: My Blog Page
    I made a detailed blog page over on my website please come check it out if you want step by step breakdown of the project
  • Benchtop Bench & Vise #9: Sketchup Plans
    For those of you that need more detail in this project here is a link to my my Sketchup plans that I have stored on my Google Drive https://drive.google.com/open?id=1V2X4Dk7bOV4rtexCK1_Wb_tD1hF_...
  • Benchtop Bench & Vise #8: Top
    I made the top nice and big at 24” wide by about 18” deep so I have a lot of room to work on. The top is made from 2×4’s with the rounded edges cut off so the sides were v...
  • Benchtop Bench & Vise #7: Vise Components
    The vise is made up off double up 1×4 solid oak boards that I glued together to form the inside and external vise components… I had to carefully place 3/4” holes to receive the ...
  • Benchtop Bench & Vise #6: Wide Stretchers & Completed Base
    These 2 stretchers attach the left and right side of the bench and again I used a pieces of 2×4. Put a tennon on the left and right sides of the stretcher and then measured from the outside fa...
  • Epic Woodworking
    On Saturday I visited a well know woodworker Tom McLaughlin at Epic Woodworking I wrote a blog entry for those of you that would like to read it Here
  • I wanted to really like this saw but dont
    Hi Folks, So I have this saw for well over a year and have used it a lot and is supposed to be my go to tool in the workshop but sadly im not loving it… What I like:Its powerful enough ...
  • Great Value Pack at a decent price point
    So I just purchased this Impact Driver from the Home Depot and it included a charger and 2 Lithium battery’s. I really like this drill and in the short time ive had this drill i have put it t...
  • Expensive but Useful
    So I purchased this because of a couple of reasons: I am tired of spending a lot of money on trim and molding at the the big box stores and I have started to make my own on the router table easy...
  • Quality saw right out of the box
    I was replacing a Craftsman Miter saw for a better sliding version amd I stuck with Craftsman becaise the other saw was perfect until I stsrted working with wider boards and was tires off setting u...