LumberJocks

whit's Blog

  • Advertise with us
This blog is written by whit | 1 entry so far

Latest Entry

Template Cutting Faux Pas

516 days ago by whit | 0 comments »

I’m working on a rigid heddle loom and came across an issue cutting out the sides. To some of you more well-versed in the arts and sciences of template cutting, this is probably a ho-hum tip. For me, it was an “Ah hah!!” moment. I’d taken care to make sure the minimum radius in the template was .5” since that’s the bit I used for the cutout. What I didn’t take into account was the length of the arms on the router table guard/DC that resulted in what could be termed an “interference issue”. You’ll notice that the inch or so between the bit and the radiused intersection is conspicuously longer than the .5” between th...

Read this entry »


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase