LumberJocks

wellington's Favorites

  • Advertise with us
View poroskywood's profile

Drunken Cutting Boards #1: Drunken Alice in Wonderland Cutting Board

09-10-2009 03:22 AM by poroskywood | 50 comments »

Hey everybody, after a few personal messages here is my version of a how to on a Drunken Checker Board. I of coarse bow to the Chairman of the Board and pay tribute with beer. This is a Off-Checker pattern I call “Drunken Alice in Wonderland” The “serendipitous” nature of this piece is appealing in a far out sort of way. Here Goes… So first I prepare the Material. I am using Hard Maple and Walnut both are surfaced flat and cut 1” x 9” x 14&...

Read this entry »


View Jon3's profile

Compass Rose Inlay #2: Inlay the Compass Rose

12-15-2009 09:25 PM by Jon3 | 13 comments »

I can’t emphasize enough how important it is to take this part slowly. There are no shortcuts that leave you with a great inlay! Most commercial veneer is thin, 1/42nd or so. So you don’t have a lot of room to work with, once you’ve inlaid the compass rose. That means you need to make sure your inlay surface is ready to go. I used this maple panel with a little bit of curl to it. This has been pre-sanded to 320. You start by solidly taping down the inlay in i...

Read this entry »



DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com