Better late than Never…
OK, it’s time for the Finishing part!
1. I gave ALL Parts a few coats of BLO (Boiled Linseed Oil as from Home D). This took a little time because I had to wait 2-4 days after each coat to be sure it cured good before putting another coat on them.
2. I wanted to give just the Bottom piece, on the Lettering side, more protection because it would be taking most of the abuse. I have applied several coats of Polyurethane Semi Gloss only on that surface letting cure at least a day followed by a light sanding and another coat…. I’m still in the process of doing that… So far, I have applied 4 coats… will do a few more.
Next, will be the test Assembly process… showing each Step…
-- Have Fun! Joe Lyddon - Alta Loma, CA USA - Home: http://www.WoodworkStuff.net ... My Small Gallery: http://www.ncwoodworker.net/pp/showgallery.php?ppuser=1389&cat=500"