LumberJocks

waho6o9's Favorites

  • Advertise with us
View pintodeluxe's profile

Stickley / Jeff Jewitt Arts and Crafts Finish

04-15-2013 01:24 AM by pintodeluxe | 14 comments »

I wanted to recreate this Jeff Jewitt finish from Fine Woodworking #157, however the article didn’t list which formula was used. I consulted with Jeff, and it was Transtint Brown Mohogany dye, followed by McCloskeys Walnut stain. McClosky no longer makes stain, but sold to Valspar / Cabot. ---So I set out to make a sample board to achieve the rich, dark color I was after. ---The top colors are stain only, the middle colors are dye first then stain, and the bottom color is dye only. ...

Read this entry »


View CreekOne's profile

Japanese Tools #2: Vocabulary.

09-10-2014 03:55 PM by CreekOne | 0 comments »

THIS IS A WORK IN PROGRESS, PLEASE HELP ME FILL THIS OUT.Send me a message or a comment to add stuff This is my small vocabulary of Japanese tools.This names are useful to know if you wish to use, buy or search for Japanese tools.Reader should remember that the names may change in different regions of Japan. Personally I think its good to know the names of tools in more than one language, Swedish is my native tongue so I know a lot of tools in three languages already. This vocabulary...

Read this entry »


View CreekOne's profile

Japanese Tools #1: This is the start of a new series where I'm going to clean and fix up tools, specifically Japanese

09-09-2014 05:23 PM by CreekOne | 5 comments »

So. This is the first of hopefully many posts about fixing up Japanese tools, I have a lot of old tools and most of them needs fixing, cleaning and love. This is tools that I will use, some I might sell off as I don’t need all but most will stay for use. To start this series I’ll post some pictures of some of my tools that will be cared for in the future. Some Hira-ganna. Some special ganna. More ganna, some special some with long dai, some small Some more, hira-...

Read this entry »


View WoodAndShop's profile

Frank Klausz Woodworking Workshop Tour

08-25-2014 05:25 PM by WoodAndShop | 7 comments »

In my above video I share a recent visit that I made to the newly finished woodworking workshop of Frank Klausz. Frank is a world-renowned cabinetmaker and teacher who received his training in his father’s pre-electrical workshop in the mountains of Hungary. See the original blog post here. Before you ask, look at the bottom of this article for a list of all the tools that Frank mentioned in the video. When I first arrived at Frank Klausz’s home I was warmly greeted by Frank,...

Read this entry »


View doorslammer's profile

Building the Gramercy Carcass Saw Kit #1: The Build

12-05-2011 04:03 AM by doorslammer | 5 comments »

I recently purchased the Gramercy Carcass saw kit to add a nice crosscut saw to my till and if Chris Schwarz and Roy Underhill prefer it I thought I’d give it a try, but at $200 it’s a bit pricey. The kit however is a little more than half that and all that’s left to do is attach the brass spine and shape a handle. The kit comes with the saw plate sharp and ready to go, a bent brass back, a pair of split nut saw bolts and instructions with a scaled handle pattern. I chose...

Read this entry »


View MarkTheFiddler's profile

Lighting Pendants #1: Truncated Icosahedron challenge.

06-24-2014 06:37 AM by MarkTheFiddler | 18 comments »

Howdy, I’m making two chandeliers for the living room. I don’t know why I thought it might be a good idea to hang soccer balls from the ceiling. I just got it in my head that they would look good up there. Now I’m all in. The top half of the chandeliers will be solid wood while the bottom halves will be made from the wooden cages. Since I’m posting this from my I-phone, the pictures might turn out sideways or upside down. ;) This is two top halves resting o...

Read this entry »


View Wally331's profile

Building a Moving Fillister Plane #1: Precursor and laminating the body

06-12-2014 10:46 PM by Wally331 | 4 comments »

Intro- I’ve been using a lot of wooden planes recently and have really come to enjoy their lightness and the feel of wood sliding on wood. Obviously there are a ton of vintage woodies out there; however, I quite enjoy making my own versions of them. They are a lot cheaper (if you have some time on your hands) and you don’t have to deal with old warped wood and a host of other problems you may encounter. I can’t say I am an expert by any means, I’m simply sharing my...

Read this entry »


View Boxguy's profile

Boxland: Work Stations and Boxing Tips #4: Separating The Top and Cutting a Hinge to Fit

05-27-2012 12:33 AM by Boxguy | 9 comments »

How do you make a hinge and fit it in a box so that it looks like this when you are done? You Could Use This!...My Hinge Station or a Hack Saw .. Just Browsing? If you want to casually breeze through this just read the dark print and look at the pictures. For more serious readers, I have included details in the fine print. Economics: Price is a major consideration if you are making boxes for sale. I simply can’t afford to put $35 or more into a set of fine brass hinges and m...

Read this entry »


View S4S's profile

Luberjosks........for entry level poverty artists ...and guests .

03-25-2014 03:47 AM by S4S | 6 comments »

! Technologic Name it , Rate it , Tune it , Print it Scan it , Send it , Fax – Rename it Touch it , Bring it , Pay it , Watch it Buy it , Use it , Break it , Fix it , Trash it , Change it , Mail – Upgrade it Charge it , Point it , Zoom it , Press it Snap it , Work it , Quick – Erase it Write it , Cut it , Paste it , Save it Load it , Check it , Quick – Rewrite it Plug it , Play it , Burn it , Rip it Drag and Drop it , Zip – Unzi...

Read this entry »


View pintodeluxe's profile

Stickley #369 Morris Chair #6: Leather Upholstery

03-24-2014 11:12 PM by pintodeluxe | 21 comments »

I took a leather sewing class to learn how to make the Morris chair cushions. -----The seat cushion and the ottoman cushion require web frames. Here I am milling the half-lap components for the web frames. -----Web frame assemblies are glued together. The seat frame should be sized 1/4” smaller in all directions than the opening in your chair, to allow room for the leather and two layers of batting.-----Corner blocks are added to the large seat cushion for additional strength. -----I...

Read this entry »


1 2 3 4 5 next »
44 entries


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase