vonhagen's Favorites

  • Advertise with us
View S4S's profile

Luberjosks.......for entry level poverty artists....and guests .

04-11-2014 06:46 AM by S4S | 14 comments »

~ Bob BonhamWhen one learns the difference between a ’ captured cut ’ and a rubber duck , then it will be time to leave the temple and create one’s own garden . ” ~ m Got this Toshiba laptop from a best buy deal of the dayfor 299 usd. My Dell had some serious issues .It started to take a long time for it to boot up. It sounded like a piper cub taxiing down the runway . loudA couple of weeks ago I was in the middle of ending a program and for some impatient reason just clickedthe powe...

Read this entry »

View JoeyG's profile

dust stuff #8: check this one out

04-23-2012 07:33 PM by JoeyG | 17 comments »

As I sit here and wait for my walnut burl to arrive from UPS. ( My first internet order of lumber, I am a bit nervous.) I thought I would share a quick picture of my new box. I normally don’t share my projects when they are incomplete unless I am doing a blog or need a little advice on how to finish up a design. This time it is simply because I am so excited about it. This is my largest box to date. There is ruler in the picture to show scale. It is sized using the golden rectan...

Read this entry »

View JoeyG's profile

Grinder Sculpting #5: Sanding

12-30-2011 11:39 PM by JoeyG | 19 comments »

Here is a quick couple of pictures. I am not going to get to in depth with the sanding. Basically all I did was put 80 grit on my random orbital sander(ROS) and used the edge to sand out the deep scratches form the grinder. After that I went over it by hand with 80 grit getting out the swirl marks from the ROS. After I got out most of those I took a clean rag and clean water and dampened the box to help raise the grain. Next I will work my way through 100, 120, 150, 180, and 220. I have...

Read this entry »

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics