LumberJocks

LJTV: LumberJocks Woodworking Videos

  • Advertise with us

This is the list of all blog entries tagged with 'video'.

View Alex Lane's profile

BIG UPDATE----SHOPMADE HELICAL CUTTERHEAD

03-17-2008 12:44 AM by Alex Lane | 19 comments »

I have completed preliminary stages of machining a custom helical cutterhead for my DeWalt 733 Planer.The design is what I came up with from looking at other companies’ designs. This is what I created in my CAD software. Here is a video of the machining process to this pointR...

Watch this video »

View BarryW's profile

Big Bear's first shop video or shop progress in living color and sound

03-15-2008 07:54 AM by BarryW | 14 comments »

First video…isn’t techology amazing. My shop progress.

Watch this video »

View toyguy's profile

Expanding Table

03-14-2008 02:48 PM by toyguy | 28 comments »

I came upon these little videos and was truly amazed. The engineering and craftsmanship that went into this project is just unbelievable. I thought I would share it with the lumberjocks community where I know it could be appreciated. ENJOY !

Watch this video »

View Kevin's profile

Delta Unisaw #6: Video of it running with/without pulley on

03-11-2008 02:17 AM by Kevin | 21 comments »

Well I have both a video of the saw with the pulley installed and a video with the pulley pulled off. It doesn’t show as much in the video as I hoped it would. You can barely see the throat plate moving across the saw with the pulley on. I can assure that it is much worse than the video ...

Watch this video »

View teenagewoodworker's profile

Printer Table #1 (Basic Construction)

03-09-2008 02:50 AM by teenagewoodworker | 8 comments »

Hey Everybody In this episode of the Teenage Woodworker I go over some basic cabinet construction in the first part of a three part series where i make a printer table. There are a lot of technical things that i go over but try to stay with me for the whole episode. As always since i am...

Watch this video »

View Woodshopfreak's profile

Stool #4: Finish the legs and strechers (video)

03-28-2008 10:48 PM by Woodshopfreak | 18 comments »

Okay, I had some difficulties so here is the video, it should work now. It was too long and therefore made youtube not accept it so here it is. Sorry for that. Also it kind of jumps around so it may be hard to understand what I doing but I was strained for time and had to cut out alot of stuff. T...

Watch this video »

View Woodshopfreak's profile

Stool #3: Sorry for the inconvience

03-03-2008 03:22 PM by Woodshopfreak | 3 comments »

Video was too long for youtube. Sorry, working on it now. Should be ready before 5:00.

Watch this video »

View Gord Graff's profile

Hall Mirror Video (Part 2), A Design & Market Challenge

03-03-2008 12:02 PM by Gord Graff | 50 comments »

Hello All, Here is part 2 of the Pine Hall Mirror project and if you think I never make a mistake when it comes to building a project, you’d be wrong. I made a minor one here on this project and I’m going to show it to you with the hope that you don’t make the same one. I’ve also finished ...

Watch this video »

View Patrick Jaromin's profile

New Woodshop Construction #5: Custom Collector Controller

03-02-2008 06:26 AM by Patrick Jaromin | 12 comments »

If you read my last post you might recall how I decided to purchase an X10 “Powerflash Interface” to test out as a controller for my dust collector. My skepticism about how the unit worked turned out to be well-founded. The Powerflash device sends an X10 “on” signal when 6...

Watch this video »

View Woodshopfreak's profile

Stool #1: Top (Video)

03-01-2008 04:33 AM by Woodshopfreak | 10 comments »

This is the start of one project that I acctually got from a stool I saw at school. I said to myself, that would be a great stool for my shop, so I bought the wood (pine for price reasons) and started the next day. I am hopefully going to finish the project this weekend, and I will post the secon...

Watch this video »

« prev 1 ... 536 537 538 539 540 541 542 ... 553 next »
5521 videos


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com