LumberJocks

LJTV: LumberJocks Woodworking Videos

  • Advertise with us

This is the list of all blog entries tagged with 'video'.

View JordsWoodShop's profile

Turning a bowl

09-11-2012 12:27 PM by JordsWoodShop | 3 comments »

This is my second attempt at turning a bowl and I am rather pleased with the result. There is still tool marks on the inside of the bowl that ideally wouldn’t be there, but with my very limited turning skills it was as good as it was going to get! From youtubeIn this video I turn a si...

Watch this video »

View TheBoxStoreCraftsman's profile

Drill Press Wood Turning

09-11-2012 01:37 AM by TheBoxStoreCraftsman | 4 comments »

Adding a lathe to the arsenal of tools in your shop is usually a milestone for most weekend wood workers as other tools, needs and money tend to push that addition down the list for most of us. So what do you do if you don’t have a lathe but you have the need for some small turnings to help...

Watch this video »

View bigchopperoo's profile

Blue Tape Tips

09-10-2012 12:41 PM by bigchopperoo | 13 comments »

Hello fellow WoodChopperoo’s. It’s a Monday morning and back to work. So here is a video to hopefully make you smile. This weeks tip is using blue tape. Safety Dan and I show you our favorate uses for it. Hope you enjoy it.

Watch this video »

View CueballRosendaul's profile

200+ Wine Bottle balancers #3: Angled hole? NO straight thru.

09-10-2012 12:39 PM by CueballRosendaul | 15 comments »

Several people have asked if I bored the neck hole at a 42 degree angle too, and the answer is no. When I made the first batch of these 10 years ago I did, actually they were at a 45 degree angle. That’s pretty hard to do and made for a very tippy piece when using 3/4” stock. If you n...

Watch this video »

View Bob Simmons's profile

Stop Block - How to Make Dead on Cuts Simple & Easy

09-08-2012 05:12 PM by Bob Simmons | 21 comments »

Watch the woodworking how to video clip to learn how simple & easy it can be to make dead on cuts every time. The woodworking lessons in the YouTube video are simple, yet profound. It’s all about quality & the efficiency of each cut made in the shop. A stop block is essential t...

Watch this video »

View Sailor's profile

The Folding Stick Chair

09-08-2012 01:50 AM by Sailor | 14 comments »

A super cool folding chair! I actually found this project here on Lumberjocks quite a while back when jdtorque posted it. He found it when another LJ, eddie posted it. So I know it’s not the first time it’s been on here but I am aware that not every LJ has seen it (I recently met...

Watch this video »

View Stevinmarin's profile

2012 WWMM shop tour

09-07-2012 08:38 PM by Stevinmarin | 10 comments »

It has been a few years since I shot a shop tour, so I thought I would shoot an updated one this week. I also thought it would be worth while to revisit some of my old projects and see how they are holding up.

Watch this video »

View CueballRosendaul's profile

200+ Wine Bottle balancers #1: Wine bottle balancers for the wedding

09-07-2012 04:31 PM by CueballRosendaul | 9 comments »

About 10 years ago, I made a batch of those wine bottle balance pieces for Christmas presents. When my step daughter was here, talking about gifts for the guests who make the long drive to her wedding, I suggested these would be pretty nice. I was thinking like 1 for each couple, so maybe I’...

Watch this video »

View shipwright's profile

V8 Degree wedge powered workbench #5: Assembling the inter-laid legs.

09-07-2012 03:31 AM by shipwright | 13 comments »

Ok, lets get into the leg assemblies. This is one of the really interesting parts of my bench. The leg assemblies end up as perfectly fitted finger joints with the very best possible glue joint but can be cut and assembled with butt joints and simple fasteners. I used a pneumatic stapler. Her...

Watch this video »

View Canadian Woodworks's profile

In the wood shop today #10: Rocking chairs - Guitar Chairs - Low Back Chair

09-06-2012 07:25 PM by Canadian Woodworks | 6 comments »

An update on the projects I’m currently working on in my custom wood working shop. I specialize in organic style furniture chairs and tables. Thanks for having a look hope you enjoy!

Watch this video »

« prev 1 ... 259 260 261 262 263 264 265 ... 489 next »
4881 videos


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com