LumberJocks

LJTV: LumberJocks Woodworking Videos

  • Advertise with us

This is the list of all blog entries tagged with 'video'.

View Brett's profile

Bandsaw Dust Collection

10-21-2012 08:07 AM by Brett | 10 comments »

As I continue to make more projects out of wood, I find that I rely on my bandsaw for more and more of them. The bandsaw is great for cutting curves, resawing wood and for cutting blanks for woodturning. The bandsaw is very versitile and comes in useful for many projects but it does have one ma...

Watch this video »

View Dave's profile

refurbishing old tools #22: Wood Plane 101

10-21-2012 01:01 AM by Dave | 33 comments »

A few people have had some questions about the ways I have done some of the refurbishing and purchasing of old traditional wooden planes.Here is a short video on some of the things I have learned through the years.These are my methods and opinions in refurbishing ole planes.

Watch this video »

View Brian024's profile

Multipurpose Work Table #2: A place for a Miter Saw

10-20-2012 11:38 PM by Brian024 | 3 comments »

Here I begin work on the miter saw portion of the table.

Watch this video »

View Canadian Woodworks's profile

In the wood shop today #12: Re-saw beautiful cocobolo for rocking chair seat

10-20-2012 05:53 PM by Canadian Woodworks | 2 comments »

Hey all! This is just a really short video of me re-sawing a piece of Cocobolo to be flipped open and book matched. This piece will be used in the center section of one of my Maloof inspired rocking chairs.

Watch this video »

View Shawn Sealer's profile

TIW Review No 03 - Rockler Mixing Mate

10-20-2012 03:10 PM by Shawn Sealer | 2 comments »

Testing out Rockler’s All-In-One Mix, Pour, and Store Solution the Mixing Mate.

Watch this video »

View tyskkvinna's profile

Videos #9: Engraving on the Sheet Router

10-20-2012 11:59 AM by tyskkvinna | 11 comments »

A quick video of the engraving process on the sheet router.

Watch this video »

View Stevinmarin's profile

Halloween stick mustaches!

10-19-2012 04:39 PM by Stevinmarin | 11 comments »

Make these using scrap wood and you will be the life of the party. Well, maybe bring beer too. Here are the templates, if you'd like to make some.

Watch this video »

View Hoosierwoodcraft's profile

Historic Woodworker Videos #11: Oshkosh Woodworker Strike

10-19-2012 02:06 PM by Hoosierwoodcraft | 4 comments »

Because most of us work at a small studio shop -with one or two employees, we forget that most of modern equipment was first used in a factory. I wanted to look back at the industrial revolution in 1898, when George Paine built a new factory to make internal wooden doors and lower prices; and ...

Watch this video »

View Bob Simmons's profile

Parquetry #3: Compass Rose - How to Project

10-18-2012 04:00 PM by Bob Simmons | 10 comments »

Learn how to make the wooden compass rose design. This wood design of sacred geometry is made by cutting hardwood segments of maple and walnut on the band saw. Band saw cross cut sleds with angles of 22-1/2 degrees and 45 degrees ensure consistent accurate segments. Watch and learn how the ...

Watch this video »

View Sailor's profile

Adjustable Dado Jig

10-18-2012 02:04 AM by Sailor | 6 comments »

My short and to the point video on an adjustable router dado jig. I know there are several plans and videos about these floating around but there don’t seem to be many videos that are short and to the point. I have been needing one of these and finally decided to jump on it and get it d...

Watch this video »

« prev 1 ... 243 244 245 246 247 248 249 ... 482 next »
4820 videos


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com