LumberJocks

LJTV: LumberJocks Woodworking Videos

  • Advertise with us

This is the list of all blog entries tagged with 'video'.

View revieck's profile

Building a ear ring holder for the Wife.

03-04-2012 02:49 AM by revieck | 4 comments »

http://youtu.be/EB7B2qAsL-c

Watch this video »

View Brian Havens's profile

Brian Havens, Woodturner

03-03-2012 09:33 PM by Brian Havens | 11 comments »

This is a video I made to promote my turning sales, but I think that my fellow woodturners and woodworkers will enjoy it as well. Ooop! Almost forgot the disclaimer: WARNING: Woodturning can—is—highly addictive. Brian Havens, The Fallen Tree, and any and all of their associates canno...

Watch this video »

View StumpyNubs's profile

The Stumpy Nubs Workshop #13: Pins vs Tails and the 2 handled dovetail saw!

03-03-2012 02:47 AM by StumpyNubs | 12 comments »

Part two of the dovetail series shows how Stumpy cuts ‘em with a 2 handles saw! Lots of great tips, and the twisted humor you’ve come to expect. (Note- We’re still trying to figure this new software out. Sorry for the quality inconsistencies. And the new microphones are on th...

Watch this video »

View andyboy's profile

Lamp table part 2.

03-03-2012 01:43 AM by andyboy | 6 comments »

Making and hanging the door using “chunky” butt hinges. Oh and the end credits are at the wrong end….yes I noticed that.

Watch this video »

View andyboy's profile

Lamp Table part 1

03-02-2012 10:04 PM by andyboy | 6 comments »

Here is a little lamp table I have made to demonstrate hanging a door using butt hinges. In this video I show the process involved to construct the base less the door. The door is constructed and hung in part 2.

Watch this video »

View Stevinmarin's profile

Table saw outfeed supports

03-02-2012 09:08 PM by Stevinmarin | 25 comments »

Just a quick one. I had a bunch of rollers and decided to make some outfeed supports for my new table saw.

Watch this video »

View WoodJediNTraining's profile

How to Build an Oak KnickKnack Cabinet #3: Part 3 of How to build an Oak Knickkknack Cabinet

03-02-2012 10:07 AM by WoodJediNTraining | 2 comments »

Well it has finally arrived. I do apologize for the delay on this last video in the Oak Cabinet build. Due to mother nature not cooperating with me, videoing was delayed. Hard rain and a metal shop roof make for very bad audio. I hope you enjoy this last segmant. If you are interested in Pl...

Watch this video »

View wnwoodworkingschool's profile

5 Cuts to a "Perfect" Cross Cut Sled

03-01-2012 02:39 AM by wnwoodworkingschool | 50 comments »

I’ve been getting a few email requests for a video on how I calculate the error ratio and how to correct and construct a cross cut sled that’s dead on square. I’ve been demonstrating this at the Woodworking shows for the past 5, 6 years and I still get emails asking me about the...

Watch this video »

View jjw5858's profile

Woodworking Music Video 3

02-29-2012 10:22 PM by jjw5858 | 12 comments »

Hey everyone, not sure if this is of an interest or not but when I am not spending my pastime in the woodshop I also play guitar. I thought I would share a rough track from my home studio of a piece I have been working on the last few months on and off. The title of the actual instrumental is ...

Watch this video »

View Paul Sellers's profile

Raising panels with the Stanley #4

02-29-2012 01:04 PM by Paul Sellers | 44 comments »

Should I tell you that a plain Jane #4 plane with no retrofit irons, specialist cap irons or dead flat soles is of equal value to the beastly heavyweights engineers and salesmen tell you you need I would of course enter the realms of controversy most men fear to tread. But I have to do it for the...

Watch this video »

« prev 1 ... 242 243 244 245 246 247 248 ... 428 next »
4280 videos


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com