LJTV: LumberJocks Woodworking Videos

• most recent |
• most read |
• most discussed |
• most favorited

This is the list of all blog entries tagged with 'video'.

Krenov-inspired cabinet #3: Overlapping rabbets to fit the doors 20 days ago by Al Navas | 5 comments » From my blog: In this episode I show how overlapping rabbets provide one solution to fitting the doors to the cabinet, while minimizing the door gap. I used a small shoulder plane to clean up the rabbet surfaces, to improve the fit and allow the doors to close with a nice, tight fit. Credit... Watch this video »	Krenov-inspired cabinet #2: Knife hinges 22 days ago by Al Navas | 3 comments » For the hand tool users: If you have any suggestions on how I could improve my chisel technique to chop the mortises, please let me know ;-) – THANKS! From my blog post: In this episode I show how I did the layout and chopped the mortises for the knife hinges in the doors, and in the ... Watch this video »
Insetting an inlay on a dining table 25 days ago by Skip | 14 comments » Please don’t be too critical on this one. This was my first video and also my first attempt to inset an inlay. I had a lot of hours in this table and was very nervous. You may ask, “Why the inlay”. I just wanted an accent. - – Skip – - Watch this video »	Jig for mating two curved surfaces 25 days ago by Skip | 6 comments » I built this jig, so I could mate two curved surfaces and have a clean glue joint. I used it on a dining table. I will post pictures of the table shortly. —Skip— Watch this video »
Sharpening a cabinet scraper 25 days ago by Skip | 13 comments » Someone asked me to post this video on this site, so here we go. It is my idea of how to sharpen a cabinet scraper. If I am all wet, please let me know. Watch this video »	Need Help on Editing software for Video 25 days ago by gene | 10 comments » Hi! Everyone,I am trying to convert a video that I have shot on my video camera for uploading to the site. My question is, What is the best program to purchase in order to get my video to load as a complete video instead of breaking it down into short segments? I know that the videos I see everyo... Watch this video »
Building a Deck from my SketchUp plan! #3: Deck in constuction stage! 28 days ago by Dick Cain | 16 comments » Well, we got the permit, & finally started building it. The demolishing of the old porch didn’t take too long, because it was so poorly constructed, it was hanging by a thread. They poured the slab over some clay in between the foundation walls, The clay had settled over time... Watch this video »	Sewing Table #2: My First Fine Furnature!!! Getting Started... Milling the Lumber 28 days ago by Blake | 25 comments » Well, I am finally graduating to furniture. I intend to blog the journey in this series to share what I learn in the transition from small boxes to full size furniture. I’ve done large projects before but furniture is sort of the ‘holy grail’ of woodworking, in my mind. It is wh... Watch this video »
Krenov-inspired cabinet #1: The doors 32 days ago by Al Navas | 5 comments » From my blog: This time I show how I made the frame and panel cabinet doors, with emphasis on the simple design elements that enhance their looks. For example, it is desirable to match the grain across the rails – and always keep track of which frame piece goes where ;-) . But the focus... Watch this video »	Cool stuff for Leigh jigs #2: Isoloc templates 34 days ago by Al Navas | 1 comment » From my blog: Available in six joint patterns, Isoloc joints and templates are unique to Leigh. The styles are: The Wave, The Ellipse, the Key, The Mirror Key, Clover, and Bears Ears. Their large glue surface area and the mechanical interlock of dovetails combine to make a unique joint, availa... Watch this video »

1 2 3 4 5 ... 20
193 videos

Your Online Shop - Your Support Is Greatly Appreciated - Your Woodworking Showcase - 3 Ways To Help, Financially - Your Woodworking Community

• 
•