LJTV: LumberJocks Woodworking Videos

  • Advertise with us

This is the list of all blog entries tagged with 'video'.

View CartersWhittling's profile

Workbench #10: Making Wooden Nuts

10-08-2011 04:35 AM by CartersWhittling | 27 comments »

Hello. In this video I show you how I make wooden nuts for my bench with a tap my friend Chris Legendre and I built. I explain some of the details about the tap and show you how its used and set up. Again like I mentioned in my last blog entry, I will be making a video later showing you how to ac...

Watch this video »

View Stevinmarin's profile

Make stuff with a log

09-25-2010 02:16 AM by Stevinmarin | 37 comments »

Get in touch with your inner woodworker and make things with just a log. Here are three and a half ideas.

Watch this video »

View Daren Nelson's profile

My under $100 wide drum sander (a work in progress)

10-18-2008 03:02 PM by Daren Nelson | 22 comments »

I mill wide boards. I have been slipping some of them in the side door of a local cabinet shop when I need them surfaced, but that is getting to be a hassle. I decided to make a wide drum sander. Not really a thickness sander since I mill my own lumber, just a sander to take the sawmill marks out...

Watch this video »

View Sheila Landry (scrollgirl)'s profile

Online Scroll Saw Class - Incredibly Fun Adventures in Scroll Sawing #6: Cutting Sharp (Acute) Outside Corners

08-06-2011 02:50 AM by Sheila Landry (scrollgirl) | 38 comments »

By now most of you should have a bit of a feel for cutting some nice outside curves on the scroll saw. As we know however, most designs also consist of some nice sharp angles. Making accurate corners can be a bit of a challenge when you are new to scroll sawing, but with a few quick tips and a ...

Watch this video »

View Sheila Landry (scrollgirl)'s profile

Online Scroll Saw Class - Incredibly Fun Adventures in Scroll Sawing #10: Lesson 10 - Cutting Negative Designs

10-01-2011 04:56 PM by Sheila Landry (scrollgirl) | 8 comments »

In scroll sawing, there are several different types of ways to make a nice design. Some people make beautiful portraits by playing with lights and shadows. Here is an example of portrait designs: The above portrait was designed by my partner Keith. I have not yet done much portrait cutt...

Watch this video »

View John Nixon's profile

The Super Sled #1: Shop Built Tenon Jig

03-23-2009 12:09 PM by John Nixon | 8 comments »

I finished the latest accessory for the Super Sled – the Tenon Jig. It’s pretty darn easy to build. Given the cost of commercial tenon jigs, you could easily make this one with the scrap plywood you have laying around. The Tenon Jig’s features include: - micro adjustment feat...

Watch this video »

View CartersWhittling's profile

Tap and Screw Jig Tutorial #2: Starting the Tap

01-18-2012 06:27 AM by CartersWhittling | 33 comments »

Hello. I have finally put out the second installment of the tutorial. I had to break up the video into two sections in order to fit it onto youtube. In this part I begin work on the tap by making the guide block my friend Chris Legendre designed. The lumber you want to use for the guide sho...

Watch this video »

View Sheila Landry (scrollgirl)'s profile

Online Scroll Saw Class - Incredibly Fun Adventures in Scroll Sawing #9: Lesson 9 - Cutting Bevels on the Scroll Saw

09-30-2011 11:18 PM by Sheila Landry (scrollgirl) | 18 comments »

Well, you all should have had time to practice cutting all the inside curves and corners on the frames of the practice patterns that I gave you in the previous lessons. Now we should all be ready to move on to learning how to cut on a bevel. One of the reasons that I like the scroll saw s...

Watch this video »

View Stevinmarin's profile

French cleat storage system for hand tools

03-01-2013 06:26 PM by Stevinmarin | 21 comments »

A new method for storing my hand tools and allow me to get rid of my pegboard. I decided on using french cleats to hang screwdrivers, pliers and other items. It’s a really flexible system that lets you get creative customizing it.

Watch this video »

View JordsWoodShop's profile

Scheppach cs55 / Woodstar Divar 55 Track Saw Review (festool alternative)

09-27-2012 03:51 PM by JordsWoodShop | 4 comments »

Since the first time I used a “festool ts 55″ track saw I knew I wanted one, it wasnt untill I found out the price of the tool that I decided it was going to have to wait or find an alternative.Being impatient I decided against waiting for a festool saw and started looking at other options, Makit...

Watch this video »

« prev 1 2 3 4 5 6 7 8 ... 493 next »
4921 videos

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics