LJTV: LumberJocks Woodworking Videos

  • Advertise with us

This is the list of all blog entries tagged with 'video'.

View Sodabowski's profile

Homemade tools and hardware #2: pen turning lathe prototype

08-16-2011 02:54 AM by Sodabowski | 19 comments »

Hey guys! Back from the mountains (alas, too soon). First this quickie blog post about what happens when you order a pen turning mandrel without owning a lathe. Being a cheap skate, and a long-time reuse-recycle-minded guy, I of course built myself a wee lathe with all recycled parts: motor...

Watch this video »

View CartersWhittling's profile

Workbench #13: Tail Vise Is Complete

10-19-2011 01:31 AM by CartersWhittling | 20 comments »

Hello. I have now finished the tail vise, and today I had acually started work on the base. After I had got the dovetails for the tailvise fit and the pins on the guide rod I cut out the place for the pins to be inserted in the vise assembly. I then started work on getting the notches cut in the ...

Watch this video »

View Stevinmarin's profile

Wood train whistle. Toot it up!

12-07-2012 08:57 PM by Stevinmarin | 24 comments »

Here’s how to make a 4-toned train whistle made using a 2×4. These make great stocking-stuffers or gifts. Kids love them. This is a good project to make if you have limited tools. All of my sawing could easily be accomplished with a hand saw. To get started, here is a PDF with th...

Watch this video »

View Brit's profile

The Humble Hand Brace - A Beginner's Guide to Restoring, Buying and Using #6: Part 6 - What to Look for when Buying a Secondhand Brace and more

09-13-2011 08:53 AM by Brit | 39 comments »

I thought I’d mix it up a bit in this part of the blog and record a video where I: Discuss what to look for when you pick up a secondhand brace and consider buying it. Mention variations in design and size and why you would use one size over another. Address Racerglen’s quest...

Watch this video »

View CartersWhittling's profile

Workbench #10: Making Wooden Nuts

10-08-2011 04:35 AM by CartersWhittling | 27 comments »

Hello. In this video I show you how I make wooden nuts for my bench with a tap my friend Chris Legendre and I built. I explain some of the details about the tap and show you how its used and set up. Again like I mentioned in my last blog entry, I will be making a video later showing you how to ac...

Watch this video »

View KylesWoodworking's profile

Check this out: CNC making Gun Stocks

05-19-2011 02:46 AM by KylesWoodworking | 7 comments »

I thought some of you LJ would like this video that I found on youtube: (Note: Not my video)

Watch this video »

View thewoodwhisperer's profile

Exact-Width Dado Jig

02-12-2011 07:06 PM by thewoodwhisperer | 12 comments »

Right Click to DownloadRight Click to Download in HDSubscription Options In the Weekend Wall Shelf episode, I showed you how to use a parallel jig to create dados. But the jig was originally created for making coves at the tablesaw. So here’s a special jig made specifically for the purpos...

Watch this video »

View WoodJediNTraining's profile

Make a Folding Out Feed Table for your Table Saw

02-20-2013 05:22 PM by WoodJediNTraining | 16 comments »

This Week I show you how to make a folding out feed table for your table saw. This design was based after an article and plan found in a 2009 issue of Woodworker’s Journal Magazine. Originally the plan was designed for a Cabinet saw with a Biesemeyer Fence System, so I had to make some slig...

Watch this video »

View Stevinmarin's profile

Make stuff with a log

09-25-2010 02:16 AM by Stevinmarin | 37 comments »

Get in touch with your inner woodworker and make things with just a log. Here are three and a half ideas.

Watch this video »

View Sheila Landry (scrollgirl)'s profile

Online Scroll Saw Class - Incredibly Fun Adventures in Scroll Sawing #6: Cutting Sharp (Acute) Outside Corners

08-06-2011 02:50 AM by Sheila Landry (scrollgirl) | 38 comments »

By now most of you should have a bit of a feel for cutting some nice outside curves on the scroll saw. As we know however, most designs also consist of some nice sharp angles. Making accurate corners can be a bit of a challenge when you are new to scroll sawing, but with a few quick tips and a ...

Watch this video »

« prev 1 2 3 4 5 6 7 ... 444 next »
4433 videos

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics