LumberJocks

LJTV: LumberJocks Woodworking Videos

  • View all advertisers
  • Advertise with us

This is the list of all blog entries tagged with 'video'.

View Gord Graff's profile

The Mortise Pal Tool Review (full length version)

1287 days ago by Gord Graff | 12 comments »

Hi All, I was encouraged by a number of members here to post the tool review I shot not long ago regarding the Mortise Pal jig. I must warn you, this video tool review is not for the faint at heart, it’s a full 27 minutes long. I can assure you that I didn’t gloss over this jig for the sake...

Watch this video »
View Todd A. Clippinger's profile

Shop Skills #2: Card Scrapers the Video!

1609 days ago by Todd A. Clippinger | 54 comments »

It’s Finally Here! I have completed my first feature woodworking video. This video shows how I sharpen my card scrapers. It is a simple process and I kept the instruction simple with some close-up video action. I hope this post goes smooth, it has taken me all day to figure out how...

Watch this video »
View Alin Dobra's profile

Dovetailing a box

1991 days ago by Alin Dobra | 34 comments »

Hello, In this blog I spend almost 40 minutes in four videos explaining how I cut dovetails. Since I give most of the explanations in the video, I will not repeat them in writing. There are multiple ways you can use these videos:1. See how somebody else is cutting dovetails and maybe get s...

Watch this video »
View Bob Babcock's profile

Sketchup Tutorials #5: Fall Challenge Tutorial

2088 days ago by Bob Babcock | 15 comments »

A quick tutorial to get you all started. Very basic…..very unedited. Sorry I don’t have much time these days so I had to do this quick…..and it shows.

Watch this video »
View dustbunny's profile

Torque WorkCentre #5: Birds Beak Shelving

947 days ago by dustbunny | 16 comments »

About two weeks ago Hopdevil posted a question to the forum about shelving he had seen in the Martha Stewart Magazine. It is called birds beak shelving.Well thank you Hopdevil, a gun went off in my head. This would be the perfect project for the Torque WorkCentre.So off I went to my shop with vid...

Watch this video »
View wnwoodworkingschool's profile

5 Cuts to a "Perfect" Cross Cut Sled

451 days ago by wnwoodworkingschool | 50 comments »

I’ve been getting a few email requests for a video on how I calculate the error ratio and how to correct and construct a cross cut sled that’s dead on square. I’ve been demonstrating this at the Woodworking shows for the past 5, 6 years and I still get emails asking me about the...

Watch this video »
View John Nixon's profile

The Super Sled #1: Shop Built Tenon Jig

1524 days ago by John Nixon | 8 comments »

I finished the latest accessory for the Super Sled – the Tenon Jig. It’s pretty darn easy to build. Given the cost of commercial tenon jigs, you could easily make this one with the scrap plywood you have laying around. The Tenon Jig’s features include: - micro adjustment feat...

Watch this video »
View Sheila Landry (scrollgirl)'s profile

Online Scroll Saw Class - Incredibly Fun Adventures in Scroll Sawing #4: Let the Scrolling Begin - Casting on and Casting Off

675 days ago by Sheila Landry (scrollgirl) | 69 comments »

Now that everyone has their patterns applied to the wood, we are finally ready to turn on our saws and do some cutting. Since the practice patterns that I have given you have no inside cuts, we are going to learn some practical ways to start and finish our cutting lines. I call this ‘ca...

Watch this video »
View Bob Babcock's profile

Sketchup Tutorials #2: About time I started doing these!

2110 days ago by Bob Babcock | 24 comments »

OK…I’m finally starting to produce some content for this. The first a simple tutorial on creating ellipses and another a simplified mortise and tenon joint. I have a few tutorials on my to do list but I need some more suggestions. Any issues or concepts you would like illustrated? ...

Watch this video »
View Brit's profile

The Humble Hand Brace - A Beginner's Guide to Restoring, Buying and Using #7: Part 7 - Sharpening an Auger Bit

601 days ago by Brit | 35 comments »

I know I said that sharpening an auger bit would be part 8 of this blog series, but I’ve taken the liberty of bringing it forward since the ‘Using a Hand Brace’ part isn’t finished yet. After spending precious time restoring a hand brace, you will soon realize that it isn’...

Watch this video »

« prev 1 2 3 4 5 6 ... 291 next »
2904 videos

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase