LumberJocks

LJTV: LumberJocks Woodworking Videos

  • Advertise with us

This is the list of all blog entries tagged with 'video'.

View John Nixon's profile

Horizontal Router Table

06-19-2007 02:10 PM by John Nixon | 19 comments »

I recently had the pleasure of reviewing and making a video for the MLCS horizontal router table. In this video, I show how to make Mortises and Tenons easily on this machine. Also covered in the video is raised panels, crown molding and custom molding. The machine is nice, and definitely as s...

Watch this video »

View David's profile

A Simple Planter Box

07-10-2009 06:29 PM by David | 10 comments »

Sometimes its just plain fun to do a quick and satisfying project. This is a great weekend project made with some scrap and extra material sitting around the shop . . . a great way to answer the “time to clean shop” request from my wife! Comparison of Planter box (left) finished...

Watch this video »

View mot's profile

Jigs and Fixtures #3: Shooting Board Basics - VIDEO

01-13-2008 08:46 PM by mot | 35 comments »

WayneC, Bob #2 and I, have had some conversations about shooting boards. The conversations don’t last long because we all agree with eachother. It’s really the death of conversation. However, some of the hand tool posts have netted some good questions on what a shooting board is, h...

Watch this video »

View David's profile

Kreg Pocket Screw Jig

05-04-2007 09:05 AM by David | 32 comments »

Well, things have been busy at home and at work. I finally got back in the shop today to work on a cherry display shelf for some close friends in Central Oregon. I am using my Kreg Pocket Screw Jig for the joinery. I thought it would be fun to share my day with a small video. Hope you can bear wi...

Watch this video »

View MyChipCarving's profile

Chip Carving Class - Quilt Squares #1: Class Description

03-02-2011 11:43 PM by MyChipCarving | 75 comments »

Hello and welcome to the first (of many ;-) LJ Chip Carving Class.I’ll be leading you step-by-step through this class which is sure to be a lot of fun. Skill level: All levels! I will provide instruction every step of the way! Beginners are my specialty :-). Advanced chip carvers are wel...

Watch this video »

View Dave Rutan's profile (online now)

Shop Built Clamps

07-02-2012 04:52 PM by Dave Rutan | 15 comments »

Lately I’ve been looking around trying to find inexpensive ways to make clamps to use in the shop. I think of my purchased commercially available clamps I own two 3 foot bar clamps and three Quick Grip clamps, plus two old c-clamps. Bar Type Clamps: The first information I found about...

Watch this video »

View CartersWhittling's profile

Workbench #9: Making Wooden Screws

10-08-2011 02:33 AM by CartersWhittling | 57 comments »

Hello. This is a video showing the process I go through to make wooden screws. I briefly try to explain how it is set up and show the jig making the screw. I will soon have a video on making wooden nuts aswell. I will eventually make a video showing how to make the tap and screw making jig and ex...

Watch this video »

View David's profile

LJ CSS - The Digital Lumberjock #1: Uploading Photos - UPDATED

10-01-2007 08:09 AM by David | 13 comments »

This is the first in a series of screencasts and video clips demonstrating how to capture and upload digital content to Lumberjocks. The ultimate goal is to add to your skill set and your ability to enhance your LJ Projects, Blog entries and Forum topics. The first episode focuses on uploading ph...

Watch this video »

View CartersWhittling's profile

Tap and Screw Jig Tutorial #1: Intro/Screw Dimensioning

11-25-2011 03:28 AM by CartersWhittling | 49 comments »

Hello. This is a new blog series I am doing. The topic is how to make a tap and screw jig for making large wooden screws. To start I will say that I hope many of the readers find this series useful so they can use the knowledge to make their own screws and nuts for clamps, vises, presses, etc&...

Watch this video »

View David's profile

A Six-Tube Scroll Saw Blade Holder

01-31-2009 10:25 AM by David | 4 comments »

A Six-Tube Scroll Saw Blade Holder This was a quick and fun shop project. The material came from a small 2/4 board of gum cherry that was left over from another project. It took care to wrap the grain with respect to the sides and back. I almost missed this and had a “T-Chisel” event w...

Watch this video »

« prev 1 2 3 4 5 ... 425 next »
4241 videos


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com