LumberJocks

LJTV: LumberJocks Woodworking Videos

  • Advertise with us

This is the list of all blog entries tagged with 'video'.

View Brit's profile

The Humble Hand Brace - A Beginner's Guide to Restoring, Buying and Using #8: Part 8 - Tips and Tricks on Using a Hand Brace

10-25-2011 04:00 AM by Brit | 68 comments »

Sorry it has taken me so long to post the final part to this blog series. Life just gets in the way sometimes. However, here it is and I hope you enjoy it. In this episode I wanted to look at using a hand brace and explore some of the so called hints and tips out there to see if they really are u...

Watch this video »

View gordon55's profile

Making Your Own Colored Paste Wax

03-26-2012 04:00 AM by gordon55 | 20 comments »

Hi, I’m Brian Miller professional wood finisher. Are you having trouble finding a colored paste wax for your particular project? Let me show you how to make your own colored paste wax out a of clear paste wax right off the shelf.

Watch this video »

View Bob Simmons's profile

Creating Wood Inlay Bandings...A Step by Step Process #6: Learn how to make Wood Inlay Bandings

05-01-2012 12:00 AM by Bob Simmons | 18 comments »

Taken from original article…Learn how to make Wood Inlay Bandings Visit…TheApprenticeandTheJourneyman.com Learn more, Experience more!

Watch this video »

View Stevinmarin's profile

Wind chimes

10-12-2012 04:36 PM by Stevinmarin | 8 comments »

Making wind chimes is a really easy weekend project. If you decide to take the time to make a set, spend a little time making them sound pleasant. Check out Lee Hite’s web site, “An Engineering Approach to Wind Chime Design”. It contains everything—and I mean everything...

Watch this video »

View lwllms's profile

Accurately heat treating small tools

11-22-2012 09:16 PM by lwllms | 18 comments »

Let’s see if I can write this without getting real technical. It’d be a good thing because I don’t have a PhD in metallurgy or physics and I don’t fully understand a lot of what’s happening in heat treating tool steel. Like water, tool steel exists in several states. Water can be vapor, wate...

Watch this video »

View thewoodwhisperer's profile

French Cleat Wall Storage System

11-18-2009 07:59 AM by thewoodwhisperer | 28 comments »

A French cleat is as ingenious as it is simple. It involves securing a strip of wood with a 45 degree bevel to the wall, and then securing an opposing beveled strip on the back of a cabinet or anything you want to hang. Its incredibly strong and versatile. Its a great way to hang cabinetry and...

Watch this video »

View Stevinmarin's profile

Build a router table #2: Router table top and fence

03-16-2012 11:20 PM by Stevinmarin | 29 comments »

Really happy with the way this fence turned out. It’s got a lot of weight to it, is square, and moves pretty smoothly. I found the clamping system in a great book called Woodworking With The Router, by Bill Hylton. If you want a good, basic router book, I recommend it. Next week I plan o...

Watch this video »

View Stevinmarin's profile

Build a router table #3: Home-made router lift

03-23-2012 09:59 PM by Stevinmarin | 25 comments »

I have completed my router table and love it. I’m sure it will be a while before I take on a project this big again, but it was a fun challenge. I got the plans for this router lift from a recent issue (#121) of Shop Notes magazine. It’s a simple concept but definitely one that ...

Watch this video »

View degoose's profile (online now)

End Grain Cutting Board LJ Class 006 #5: Finally....

06-04-2011 11:19 AM by degoose | 18 comments »

Finally I have made some progress on the first lesson…enough said… watch the video........The finished component pieces ….shown at the end of the vid dry fitted.. [note that there are no gaps.. this will make for a good glue up..] have the following dimensions: Outer… 65...

Watch this video »

View CueballRosendaul's profile

200+ Wine Bottle balancers #3: Angled hole? NO straight thru.

09-10-2012 12:39 PM by CueballRosendaul | 15 comments »

Several people have asked if I bored the neck hole at a 42 degree angle too, and the answer is no. When I made the first batch of these 10 years ago I did, actually they were at a 45 degree angle. That’s pretty hard to do and made for a very tippy piece when using 3/4” stock. If you n...

Watch this video »

« prev 1 ... 5 6 7 8 9 10 11 ... 422 next »
4213 videos


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com