LJTV: LumberJocks Woodworking Videos

5 Cuts to a "Perfect" Cross Cut Sled

475 days ago by wnwoodworkingschool | 50 comments »

I’ve been getting a few email requests for a video on how I calculate the error ratio and how to correct and construct a cross cut sled that’s dead on square. I’ve been demonstrating this at the Woodworking shows for the past 5, 6 years and I still get emails asking me about the...

Watch this video »

Hand Plane Restoration #1: Stanley Bench Plane

2073 days ago by David | 73 comments »

STANLEY BENCH PLANE RESTORATION Click here for large format version PDF ELECTROLYTIC RUST REMOVAL INSTRUCTION SHEET More information available on my woodworking blog & podcast The Folding Rule Show Step #1 – Cleaning & Rust Removal I have been inspired by a number of ...

Watch this video »

The Super Sled #2: VIDEO - Mitering and Crosscut Sled

1564 days ago by John Nixon | 21 comments »

To download a measured drawing or to see the full photo gallery, click here:http://www.eaglelakewoodworking.com/post/Super-Sled-Crosscut-and-Miter-Sled.aspx Project Description: I just completed a two part video series on how I made my new table saw sled. I’ve named the new sled th...

Watch this video »

Furniture Design #1: Fibonacci gauge

2145 days ago by David | 31 comments »

1 • 1 • 2 • 3 • 5 • 8 • 13 • 21 • 34 – The Fibonacci Sequence I have been fascinated with The Fibonacci Sequence and The Golden Rectangle for some time. I finally got around to building a Fibonacci Gauge that was featured in WOOD Magazine. The guage maintains a consatnt propor...

Watch this video »

How I Make a Lazy Susan

1722 days ago by WoodMosaics | 31 comments »

Now before I get started on this little demonstration of how I do it, let me caution you on a couple things. IF you try anything like this, take the plate that your saw blade comes up through and close that hole completely up with a thin piece of wood. Make sure it is even with the top, with no g...

Watch this video »

Tap and Screw Jig Tutorial #1: Intro/Screw Dimensioning

572 days ago by CartersWhittling | 49 comments »

Hello. This is a new blog series I am doing. The topic is how to make a tap and screw jig for making large wooden screws. To start I will say that I hope many of the readers find this series useful because they can use the knowledge to make their own screws and nuts for clamps, vises, presses,...

Watch this video »

How to make a bandsaw box

1116 days ago by Stevinmarin | 40 comments »

Wow, there are a bazillion examples of bandsaw boxes on LumberJocks. I always thought they were complicated and had a hard time finding some really basic instruction. Well, here is a video for all of us bandsaw box newbies! The neat thing about bandsaw boxes is that if you give them away as gi...

Watch this video »

Shop Made Router Lift and Table

946 days ago by DaveTPilot | 21 comments »

Watch this video »

Chip Carving Class - Quilt Squares #1: Class Description

839 days ago by MyChipCarving | 74 comments »

Hello and welcome to the first (of many ;-) LJ Chip Carving Class.I’ll be leading you step-by-step through this class which is sure to be a lot of fun. Skill level: All levels! I will provide instruction every step of the way! Beginners are my specialty :-). Advanced chip carvers are wel...

Watch this video »

Homemade Bandsaw Blade Tension Quick-Release

1962 days ago by Blake | 35 comments »

Grab some popcorn… I made a movie!(Make sure the volume is up… it might be a little quiet) Story:I have been working really hard to tune up my bandsaw lately. I really wanted one of these:...for tensioning and detensioning the blade. But I am at the end of my budget and can’...

Watch this video »