LumberJocks

LJTV: LumberJocks Woodworking Videos

  • Advertise with us

This is the list of all blog entries tagged with 'video'.

View ThomasLightle's profile

Dust Collection #4: Trash Can Planer Chip Collector

01-18-2016 04:09 PM by ThomasLightle | 0 comments »

Until I get my dust collector piped to the entire workshop, I needed to use something other than my shop vac to collect planer chips. The sheer volume of sawdust created by the planer required me to build some type of receptacle that is large and easy to empty. I used inspiration from John Heis...

Watch this video »

View Chris McDowell's profile

Cutting Board Tablet Stand

01-17-2016 09:50 PM by Chris McDowell | 2 comments »

I had an oak pallet which I broke down and was able to salvage enough to make two iPad stands. They were made as gifts for Christmas. My wife showed me pictures of these on Etsy saying that her sister wanted one. So one went to her and the other went to my mother. Here is a video of the bu...

Watch this video »

View ScottM1's profile

Using open locks and part associations to draw an upper range cabinet in eCabinets 6.1.

01-17-2016 09:13 PM by ScottM1 | 0 comments »

Using open locks and part associations to draw an upper range cabinet in eCabinets 6.1. In this video I will show you how to use a couple of the new features that eCabinets has introduced in build 6.1 to draw a upper range cabinet that will allow you to set the opening needed for a range hood ...

Watch this video »

View RayArnold's profile

Planter Boxes

01-17-2016 04:49 PM by RayArnold | 0 comments »

Here is a project just in time for spring.I built these planter boxes using some redwood fence boards, This is my second woodworking video, so it my look a little rough around the edges. I guess I’m a better woodworker then a video maker, my hats off to all of you who make the great woodw...

Watch this video »

View JimDaddyO's profile

Shop stuff #31: Creating another video despite Microsoft

01-16-2016 11:47 PM by JimDaddyO | 0 comments »

Well, fighting Windows Movie Maker and getting another one done. After three tries with Microsoft Support, including giving them remote access, I get told that WMM is not compatible with Win 10, and that just sucks. It keeps freezing up on me and I lose a lot of work and Microsoft just does not c...

Watch this video »

View ThomasLightle's profile

Dust Collection #3: Simple, Cheap, and Easy Blast Gates

01-16-2016 09:56 PM by ThomasLightle | 1 comment »

Sometimes motivation behind building something as opposed to buying has to do with availability. Sometimes it has to do with cost. Sometimes it has to do with quality. In this case it has to do with all three. I set out to build blast gates with scrap material I had laying around. Mainly I d...

Watch this video »

View Mike's profile

Dart Board Cabinet Build #6: Part 6 - Finally Complete

01-16-2016 01:21 PM by Mike | 0 comments »

Hi all! Thank you for waiting so long for my final dart board cabinet build video. The wedding went well and my Brother-in-law loved the gift. He will be hanging it shortly. Thanks for watching! Mike View on YouTube

Watch this video »

View ThomasLightle's profile

Dust Collection #2: 3-Stage Dust Collector Filter Box

01-16-2016 02:52 AM by ThomasLightle | 2 comments »

After modifying my Harbor Freight dust collector, I needed a filter for the discharge of the blower. The dust collector mod did a great job eliminating a majority of the dust, but it was still discharging fine dust into my workspace – something I didn’t want to be breathing. This ti...

Watch this video »

View ThomasLightle's profile

Shop Organization #1: Stowable Sliding Rotating Planer Stand

01-15-2016 01:41 AM by ThomasLightle | 3 comments »

Space, or the lack thereof, is always the main concern for the owner of a small shop. I have been trying to figure out what to do with my planer ever since I purchased it. It weighs 92 pounds, so I can’t easily store it on a shelf or in a drawer. I also don’t have enough room for a...

Watch this video »

View HuckD's profile

Videos by HuckD #17: Dowel Jigs 1 and 2

01-14-2016 06:37 AM by HuckD | 2 comments »

I’ve made a couple of dowel jigs to use on a table and bench project that I’m making from 2×12 Southern Yellow Pine. One is useful for joining two pieces of 2 by # lumber and the other is for 4×4 lumber. They’re very inexpensive as they are made from a scrap piece of...

Watch this video »

« prev 1 ... 4 5 6 7 8 9 10 ... 458 next »
4577 videos


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com