Make a Zen Garden
I made a Zen Garden. This is a fun and simple project I did with mostly handtools. Check it out and subscribe!
This is the list of all blog entries tagged with 'video'.
 |
 My Mini Split InstallIt got too cold in my shop this winter to rely on crappy wall/space heaters so I decided to install a Pioneer ductless mini split. I’ve seen lots of posts/questions/comments on here and other boards about mini splits so I figured I’d share my experience. View on YouTube |
 Table Saw Crosscut SledThis is a must have in my shop. This essential table saw accessory will allow me to make accurate repeatable cuts on narrow work pieces and panels. I built a general use sled, fit the runners and square up the fence using the 5 cut method. I learned this method from watching the Wood Whisperer an... |
 Octave Mandolin #19: French Polishing the Octave Mandolin (Spiriting Off)This is the follow up video about the French polish that was applied on the Octave mandolin. In this video I’m talking about the spiriting off of the finish. https://www.youtube.com/watch?v=7XVf1i2kKO0&t=25s |
Ohio Tool Co Coffin PlaneGoing through restoring an old coffin plane made by Ohio Tool Co. Thanks for checking it out. |
Octave Mandolin #18: French Polishing the Octave MandolinFollow up video in the custom Octave Mandolin build. entering the finishing stages and applied the French polish in the video. Check it Out!!! https://www.youtube.com/watch?v=c9BWh8AYQg8&t=25s |
 Shop stuff #116: Modding pipe clamps with built in cauls.When doing glue ups, it’s always hard to manipulate the clamp, plus the cauls, plus keep everything aligned. This helps with that if you work in a shop alone. I made them a bit wider too so it helps the clamp with stability when on a bench too. An easy project from pieces I had around th... |
Fixing Up a Couple Woodworking ChiselsI don’t usually get lucky at yard sales and flea markets when it comes to finding old woodworking tools but I recently came across a couple chisels and a gouge that needed some handles and some time at the sharpening station.https://www.youtube.com/watch?v=2gAuP58ixbg |
 Gift Projects #1: Need a Gift? Make This Elegant Keepsake/Jewelery BoxView on YouTube I made this box as a gift for my friend Linn from the Darbin Orvar channel. We made plans to drive down to Corvallis to meet with Linn and her husband Matt, and I decided to make this wooden box for them as a gift. I used some tropical hardwood for the sides (I think it was Ip... |
Restoring and Sharpenin a Stanley No 80Restoring my stanley no 80 cabinet scraper. This was in fairly good condition sill which made this go a lot quicker. Hit that sub button. |
