LumberJocks

LJTV: LumberJocks Woodworking Videos

  • Advertise with us

This is the list of all blog entries tagged with 'video'.

View Bothus's profile

Gettin' fixina tune up my Unisaw #19: What to use?

10-05-2009 11:15 PM by Bothus | 6 comments »

Hi guys, The helmet cam I ordered came in today. I used it for this video. It’s not made for indoors and the sound quality isn’t as good as the iPhone either but it does work. Yesterday after putting the motor back together I cleaned all gummed up sawdust stuck to the inside o...

Watch this video »

View Bothus's profile

Gettin' fixina tune up my Unisaw #18: Disassembling the motor to replace the bearings.

10-05-2009 04:53 AM by Bothus | 3 comments »

I cheated a little on the Honey Do list and started on the motor. Motoring. No need to film that. It’s a short one. Take care guys, Bothus

Watch this video »

View Bothus's profile

Gettin' fixina tune up my Unisaw #17: Took the Unisaw home today

10-04-2009 06:56 AM by Bothus | 4 comments »

I decided to take the Unisaw home today since it was disassembled and reassemble it there. The only problem is I have no room in the garage. I may not get to work on my project as often because just getting to it will be a project. First I had to move every in my half of the garage out t...

Watch this video »

View Chris Davis's profile

Murphy wall bed Build - Day 2

10-03-2009 02:07 PM by Chris Davis | 0 comments »

Got a lot done yesterday. All parts cut, banded, edges cleaned up and panels processed. I have all but trim building completed on the beds and haven’t started on the bookcases yet. I plan on getting this completely finished today. Luckly I don’t have to stain and apply a finish. ...

Watch this video »

View Bothus's profile

Gettin' fixina tune up my Unisaw #16: Changing the arbor bearing... finally!

10-03-2009 07:36 AM by Bothus | 17 comments »

Today I finally got a chance to work on my Unisaw again. I wasn’t really sure what I was doing (like I needed to tell you that) but I got it done. Relax. I know there are a lot of videos here but most are less than one minute. I just watched the whole thing in about in a little over 20 ...

Watch this video »

View Chris Davis's profile

Murphy wall bed Build

10-02-2009 01:56 PM by Chris Davis | 0 comments »

Today I’ll be building a pair of murphy wall with a bookcase separating them. This will be the version I call the Hudson Bay. It is our simple Alpine with some molding added to the face. I use a stock molding found at a local hardwood supplier. They will be built unfinished in maple. T...

Watch this video »

View Bothus's profile

Gettin' fixina tune up my Unisaw #15: It's not as bad as I thought

10-01-2009 11:00 PM by Bothus | 1 comment »

In yesterday’s video I rechecked the runout on my arbor and blade after cleaning them. I was concerned because the runout at the blade was .003”. Turns out that’s not too bad. I couldn’t stand not knowing so I did the math.This is a scaled drawing I did in AutoCAD. Po...

Watch this video »

View jlsmith5963's profile

Making of the Wallpaper* Chair Arch

10-01-2009 07:18 PM by jlsmith5963 | 1 comment »

chair as arch

Watch this video »

View thewoodwhisperer's profile

Low Entertainment Center #4: Prefinishing and Final Assembly

10-01-2009 07:19 AM by thewoodwhisperer | 5 comments »

An important aspect of building furniture that many new woodworkers overlook, is the importance of finishing BEFORE the project is completely glued together. That’s the primary focus of this part of the series. A few of the topics covered in this part: How to deal with color difference...

Watch this video »

View Bothus's profile

Gettin' fixina tune up my Unisaw #14: Checking blade runout

09-30-2009 10:43 PM by Bothus | 3 comments »

Hi All, Since I will have to work late tonight and tomorrow night, I went over on my lunch hour and double checked the runout after cleaning the arbor. Then I checked it with a blade mounted too! Oh, the exciting news is that I ordered a helmet cam from amazon.idiots (I’m only kidd...

Watch this video »

« prev 1 ... 319 320 321 322 323 324 325 ... 371 next »
3701 videos


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase