LJTV: LumberJocks Woodworking Videos

  • Advertise with us

This is the list of all blog entries tagged with 'video'.

View Stevinmarin's profile

Olympic rings

08-04-2012 12:04 AM by Stevinmarin | 14 comments »

This was one of those projects that seemed simple on first inspection, but was far from it. It turned out to be quite a challenge to come up with a method for making 5 identical circles and then notching them together. But if you ever need to make a bunch of rings, the jigs I made for this work o...

Watch this video »

View thewoodwhisperer's profile

How I Clean My Blades & Bits

08-03-2012 03:33 PM by thewoodwhisperer | 29 comments »

If you find that your blades and bits just aren’t performing like they used to, you might not need to send them out for a sharpening. They might just be in desperate need of a good cleaning. Over time, pitch and resin builds up on cutting surfaces and causes them to cut less effectively....

Watch this video »

View Brit's profile

Saw Talk #20: W. Tyzack, Sons & Turner 14" Sash Saw - Sharpened and Tested

08-03-2012 07:56 AM by Brit | 26 comments »

COMMENTATOR: We go live now to the Sawing arena where Brit has just won gold. Sawing is a new Olympic event and is the only event where you get marked down for crossing the line. Brit, congratulations! BRIT: Thanks John. COMMENTATOR: You were up against Big Joe, a formidable opponen...

Watch this video »

View Bob A in NJ's profile

Tops August 1, 2012

08-03-2012 04:08 AM by Bob A in NJ | 5 comments »

Watch this video »

View TheBoxStoreCraftsman's profile

A simple Jewelry holder

08-02-2012 11:11 PM by TheBoxStoreCraftsman | 4 comments »

Here is an easy project that anybody can make. My wife needed something new for storing her jewelry, so after becoming overwhelmed by looking through all of the vast number of images Google returned, I fired up Google Sketchup and started designing my own. This is what I came up with.

Watch this video »

View Sheila Landry (scrollgirl)'s profile

Online Scroll Saw Class - Incredibly Fun Adventures in Scroll Sawing #13: "Reindeer Games" Layered Ornaments Part 3

08-02-2012 08:41 PM by Sheila Landry (scrollgirl) | 9 comments »

The next step in cutting out the reindeer ornaments is cutting the reindeer itself, as well as the back board. It was important to cut the small detailed inside cuts first from the ornament, because it is at that point that the wood has the most support. While sometimes you may forget one or t...

Watch this video »

View Delta356's profile

Tour of Furniture Restoration Shop.

08-01-2012 12:00 AM by Delta356 | 5 comments »

Hi all, hope the woodworking life is going good. I wanted to share with you a picture video I made of a Local Furniture restoration shop in Portland, OR… 5 mins from my shop. Anyways I had been going to this shop since I was in 5th grade. The owner ran an antique shop in front… This m...

Watch this video »

View Canadian Woodworks's profile

Time lapse Woodworking #13: Apply finish to book matched live edge curly walnut coffee table

07-31-2012 05:47 PM by Canadian Woodworks | 7 comments »

This is a time lapse video of me wiping on and off my 3 part hand rubbed oil / resin finish. This is the top to a solid walnut coffee table, the top is book matched live edge curly Canadian walnut. P.S I had fun with the music this time (-:

Watch this video »

View Brett's profile

An Old Door

07-31-2012 04:03 PM by Brett | 5 comments »

We live in an older home. With that comes some need of making home repairs and improvements. Our house has some nice single panel fir doors but they have been coated with many layers of paint through the years. Quite some time ago, I got the urge to see what treasure lay beneath the layers o...

Watch this video »

View StumpyNubs's profile

The Stumpy Nubs Workshop #24: The most UNIQUE drill press table you've ever seen. Drill, Baby! DRILLLLL!

07-29-2012 07:41 PM by StumpyNubs | 24 comments »

Some homemade jigs just have to be called what they are… stinking amazing. This week we come back from our summer break with a vengance. And the drill press is in our sights once again! We’ve completed the “Drill Im-press Table” by adding some unique bit storage, and so...

Watch this video »

« prev 1 ... 309 310 311 312 313 314 315 ... 530 next »
5297 videos

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics