LumberJocks

LJTV: LumberJocks Woodworking Videos

  • Advertise with us

This is the list of all blog entries tagged with 'video'.

View Stevinmarin's profile

Bent-wood quilt rack

09-14-2012 07:24 PM by Stevinmarin | 17 comments »

There are a lot of different ways to make a quilt rack. For this one I wanted to explore curves and keep the overall piece as simple as possible. (The quilts should be the stars of the show.) This will give you a chance to try bending some wood: it’s a pretty easy process and one you can us...

Watch this video »

View Brian024's profile

42: Table Saw Kickback

09-14-2012 02:42 PM by Brian024 | 9 comments »

Recently I had a minor incident with table saw kickback. Here I’ll go over what happened, what damage it caused, and what I could have done to prevent it. No I was not hurt, just my table saw was. (This was filmed a couple weeks ago and I did take the blade off and inspect it furthe...

Watch this video »

View WoodJediNTraining's profile

Shadow Casting Lamp

09-12-2012 04:59 PM by WoodJediNTraining | 7 comments »

This shadow casting lamp creates a cool effect to any room by casting a shadow on a wall of any scene you’d like to create in the lamps silhouette panels. For this project I used horses. The front of the lamp shows a horse in a natural calm state on all 4’s . And the frosted front ...

Watch this video »

View TheBoxStoreCraftsman's profile

The Circle/Radius Sanding Jig

09-12-2012 02:25 AM by TheBoxStoreCraftsman | 8 comments »

Here is an easy to make Sanding/Radius Jig to fit the Rigid oscillating spindle sander Model # EB44241. I’m building this jig out of re-purposed material, a handful of hardware and a drill press turned knob so the cost to make this jig is actually on a couple of dollars (Frugal Craftsman).

Watch this video »

View thewoodwhisperer's profile

Festool CMS Router Table First Look

09-11-2012 10:14 PM by thewoodwhisperer | 12 comments »

As most of you know, I have a nice working relationship with Festool. While they are no longer a sponsor, they do give us great tools for our giveaways throughout the year and they also provide me with tools for review purposes. This gives me a unique opportunity to show you how the tool works...

Watch this video »

View JordsWoodShop's profile

Turning a bowl

09-11-2012 12:27 PM by JordsWoodShop | 3 comments »

This is my second attempt at turning a bowl and I am rather pleased with the result. There is still tool marks on the inside of the bowl that ideally wouldn’t be there, but with my very limited turning skills it was as good as it was going to get! From youtubeIn this video I turn a si...

Watch this video »

View TheBoxStoreCraftsman's profile

Drill Press Wood Turning

09-11-2012 01:37 AM by TheBoxStoreCraftsman | 4 comments »

Adding a lathe to the arsenal of tools in your shop is usually a milestone for most weekend wood workers as other tools, needs and money tend to push that addition down the list for most of us. So what do you do if you don’t have a lathe but you have the need for some small turnings to help...

Watch this video »

View bigchopperoo's profile

Blue Tape Tips

09-10-2012 12:41 PM by bigchopperoo | 13 comments »

Hello fellow WoodChopperoo’s. It’s a Monday morning and back to work. So here is a video to hopefully make you smile. This weeks tip is using blue tape. Safety Dan and I show you our favorate uses for it. Hope you enjoy it.

Watch this video »

View CueballRosendaul's profile

200+ Wine Bottle balancers #3: Angled hole? NO straight thru.

09-10-2012 12:39 PM by CueballRosendaul | 15 comments »

Several people have asked if I bored the neck hole at a 42 degree angle too, and the answer is no. When I made the first batch of these 10 years ago I did, actually they were at a 45 degree angle. That’s pretty hard to do and made for a very tippy piece when using 3/4” stock. If you n...

Watch this video »

View Bob Simmons's profile

Stop Block - How to Make Dead on Cuts Simple & Easy

09-08-2012 05:12 PM by Bob Simmons | 21 comments »

Watch the woodworking how to video clip to learn how simple & easy it can be to make dead on cuts every time. The woodworking lessons in the YouTube video are simple, yet profound. It’s all about quality & the efficiency of each cut made in the shop. A stop block is essential t...

Watch this video »

« prev 1 ... 259 260 261 262 263 264 265 ... 489 next »
4886 videos


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com