LJTV: LumberJocks Woodworking Videos

• most recent |
• most read |
• most discussed |
• most favorited

This is the list of all blog entries tagged with 'video'.

Thorsen Table Challenge #10: Making pegs my way ! 485 days ago by Dick Cain | 22 comments » Today I tried making pegs for the false shallow holes. I had alot of trouble doing it the way the plan instructed. I would get chip out when carving the facets on the plugs. I’m using Walnut, maybe Ebony wouldn’t do this because it’s more dense. So I setup my disk sander m... Watch this video »	This is amazing, a one man wrecking crew ! 140 days ago by dlcarver | 21 comments » I don’t know if any of you guys got this yet in your emails, but you just have to see this. You can clear the whole forest in minutes. I COULDN’T BELIEVE MY EYES!!!DAVE Subject: John Deere Model 1270 A Woodsman’s Machine http://www.youtube.com/watch?v=Ei9LlLLZwAU Watch this video »
Wood Wisdom-Video Blog #1: Jigs and Fixtures 160 days ago by Woodshopfreak | 21 comments » Here is the first episode of Wood Wisdom (I say fifth because of the other videos but as you can see the title says #1 because of the new name). It is on Jigs that I have made for my shop and hopefully you can make some of these for your shop. If you have any questions message or comment me. Than... Watch this video »	Delta Unisaw #6: Video of it running with/without pulley on 171 days ago by Kevin | 21 comments » Well I have both a video of the saw with the pulley installed and a video with the pulley pulled off. It doesn’t show as much in the video as I hoped it would. You can barely see the throat plate moving across the saw with the pulley on. I can assure that it is much worse than the video ... Watch this video »
teen age woodworking #3: Milling Lumber and Some Other Stuff 201 days ago by teenagewoodworker | 21 comments » Hey Everybody! In this episode i am going to talk about how to mill lumber with only hand held power tools. This is an important part of woodworking because most boards aren’t jointed and parallel right out of the mill. Also i go through the steps of creating simple coat rack out of po... Watch this video »	Shop Organization #6: Flip Top Planer Cart Part 4: Success! 219 days ago by gizmodyne | 21 comments » StabilityThe flip top had a little play in between the flimsy tabs, I had a plan to stabilize it.. First, I shimmed the top level. I drilled a bolt hole through the side into the edge of the top. Next: Drilling for the threaded inserts. Inserting the threaded inserts Eye bolts through... Watch this video »
New Woodshop Construction #1: Setting Up Shop II, or How I Spent My Winter Vacation 219 days ago by Patrick Jaromin | 21 comments » (This is the first post here, but a continuation of a series started at my personal blog at tenonandspline.com/blog) I’m not what you would call a “neat freak.” However, I do try to keep things generally organized and find it near impossible to work in a cluttered shop. Not o... Watch this video »	Lumber Making #6: Maple Milling - Initial Halving Cut 280 days ago by Dorje | 21 comments » Well, today was the day that fellow LJ, Mike Lingenfelter, and I got to the milling of that maple log in the next door neighbor’s yard… After talking the plan of attack out for awhile, we determined that we’d halve the 35-40” diameter log in two, prop ‘em up o... Watch this video »
Shop Updates #4: Router Table #3 (with video) 60 days ago by teenagewoodworker | 20 comments » alright so now everything except for the fence is put together and it is looking awesome. i added the apron and plugged all my holes with birch plugs just for the looks and i put on a coat of poly just to make the birch plugs turn brown because they are end grain so it looks cool, no other... Watch this video »	teen age woodworking #8: Hand Cutting Dovetails 156 days ago by teenagewoodworker | 20 comments » Hey everyone, This podcast is on hand cutting dovetails. I’ve had a few problems with some things in my printer table so it will take longer than i expected to get the third episode out. I figured i would add this one so i am not podcast less for another week or two. I think that every... Watch this video »

1 2 3 4 5 6 7 ... 21
205 videos

Your Online Shop - Your Support Is Greatly Appreciated - Your Woodworking Showcase - 3 Ways To Help, Financially - Your Woodworking Community

• 
•