LumberJocks

uMinded's Blog

  • Advertise with us
This blog is written by uMinded | 6 entries so far

Latest Entry

Ridgid R4512 Table Saw #1: My R4512 Setup

01-28-2015 12:33 PM by uMinded | 10 comments »

Totally set up R4512 cast iron table saw. Lee valley brand router table insert 05J25.01 router is a BOSCH 1619 EVS which is a beast. Outfeed table out of three door hinges and a piece of planed to thickness 2×4 and 5/8 birch MDF. Recycled front fence from old crosscut sled. Maple with a T-slot extrusion. NOTES:1) If you tighten the blade lift handle with the center nob the blade misalignment goes away! I figured mine was good as I ALWAYS tighten mine (Prevent lifting with a dado blade) but the one time I measured with it loose I found the slight error everyone is so worried about. 2) I added a piece of HDPE tape to the HDPE runners on the fence to tighten everything u...

Read this entry »

Older Entries


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase