Flag Display And Shadowbox #2: Day 2
I didn’t feel much like going to work today, so I took the day off. I did some odd jobs around the house and managed to carve out some time to work on this project. I looked at all of the rough milled wood, didn’t bend or twist a bit. So I played it safe and ran it all across the jointer, through the planer to final thickness and then ripped it to final width. I made some prototype case pieces out of cherry scraps I had, and worked out the flag case size. I built a jig to cut the lower flag case miters. I kept it simple, a piece of 3/4 plywood with a 45 degree cut across one end. I glued and nailed a 3 1/2” piece of pine so I could clamp it to the miter gauge. Another...
