All Topics | Replies | Last post |
---|---|---|
Removing Twist From a Live Edge SlabI am currently working with a live edge slab from a sweet gum tree. The whole... |
15 | 04-18-2018 05:19 PM |
Jointer knive setup and resultsI decided it was time to change/sharpen the blades on my Ridgid 6” join... |
15 | 04-14-2018 03:16 PM |
Transfer image to wood - QuestionI’ve seen some info on tracing the image/drawing to wood by using black... |
17 | 03-28-2018 11:06 PM |
Is my 44" Diameter 12' Long Black Oak Log with Wind Shake still usable?We just had our huge black oak tree cut down because it was inches from our r... |
14 | 03-25-2018 03:38 PM |
Oak BurlI recently discovered this unique tree on some property my parents own. It ap... |
11 | 03-21-2018 01:16 AM |
Track Saw or Door board???I am considering a track saw but a friend mentioned making a “door boar... |
6 | 03-19-2018 08:06 PM |
Cutting Down 30yr old Birch Tree - Worth Saving for LumberHello everyone! This is my first post on this forum. We just bought our fi... |
16 | 03-19-2018 05:29 PM |
Reclaimed Wood Selection & AcclimationHi All, I’m venturing into making a barnwood kitchen table for my family. ... |
14 | 03-18-2018 03:05 AM |
Wood For Sale: Flame Box Elder, Black Walnut, Birdseye Maple ect...I have a variety of highly figured wood. Live edge and dimens... |
26 | 03-07-2018 10:18 PM |
marking lumberI mark a unique number on each slab and record all info in an excel spreadshe... |
6 | 03-02-2018 12:36 AM |
Cleaning/Stripping reclaimed Oak trimWhen my company moved from our old buildings into a single larger building, t... |
7 | 02-22-2018 05:13 PM |
Digital readout for a planer???I am thinking of adding a DRO to my 15” Powermatic planer. I think it ... |
5 | 02-22-2018 12:48 AM |
Reasons not to buy a 9 inch bandsaw?Eventually I’d like to get a 14”+ bandsaw but that’s not go... |
30 | 02-21-2018 03:43 PM |
Problems splitting a log, help neededI have a question for anyone with experience milling/splitting/riving your ow... |
20 | 02-20-2018 06:20 PM |
Workamates of our DreamsA thread for that little helper who is always there when you need her. ... |
366 | 02-15-2018 12:11 AM |
3/4" Shank ToolingI’ve got some profile cutting heads available. Most all are 3/4” diameter sha... |
4 | 02-10-2018 12:49 PM |
How to re-cut rough thicknessOkay guys, I’m hoping someone out there has a creative answer for me. ... |
16 | 02-04-2018 01:42 PM |
ID another mystery wood? Milled a log.Years ago I picked up a thick tree branch in a parking lot. Must have fallen ... |
4 | 12-29-2017 01:08 PM |
Phenolic Resin panel sourceWe’re looking for a source from which to obtain phenolic resin panels. ... |
4 | 12-28-2017 03:10 AM |
Deposit buildup on my hand planeWhy does my hand plane build up with hard deposits on the under side when pla... |
8 | 12-23-2017 09:30 AM |