LumberJocks

Woodworking forum topics tagged with 'finishing'

  • Advertise with us
All Topics Replies Last post
View Jon Anderson's profile

Polyurethane question

01-22-2017 11:34 PM by Jon Anderson in Finishing

I have heard that you can use semi gloss and finish with one coat of Gloss an...

6 01-23-2017 11:33 PM
View NicP's profile

Need help with finishing pine "sanded" plywood

01-21-2017 10:35 PM by NicP in Finishing

Hi everyone. I’m new here and just having some fustration with a projec...

6 01-23-2017 05:37 PM
View Jermey's profile

New guy question about epoxy

01-20-2017 02:52 PM by Jermey in Finishing

Hi all, I personally don’t have a vast amount of experience using 2 ...

8 01-22-2017 09:30 PM
View Natep's profile

Need help problem solving failing lacquer finish

01-20-2017 02:52 PM by Natep in Finishing

The finish is multiple coats Pre catalyzed magnamax finish. 2 coats magna...

2 01-20-2017 04:40 PM
View Jim's profile

HELP! General Finishes Rosewood very VERY red

01-08-2017 02:45 PM by Jim in Finishing

Hey everyone, so I’ve got a problem. My client wanted a dark brown stai...

24 01-16-2017 07:44 PM
View RADickson's profile

Gaps in my first End Grain Cutting Board

01-15-2017 03:53 PM by RADickson in Woodworking Skill Share

Greetings! I just finished making and sanding my first attempt at an end-gra...

6 01-16-2017 12:21 AM
View Peace's profile

Wood dyes and Birch coloring

01-12-2017 01:10 PM by Peace in Finishing

I have tried using water based dyes to enable the grain in light grained wood...

2 01-12-2017 09:15 PM
View TheQueTip's profile

Stopping end grain blotching on cutting boards

01-11-2017 12:56 AM by TheQueTip in Finishing

Hello, Are there any food safe sanding sealers? Making a pizza serving ...

5 01-11-2017 05:25 AM
View Cheapguy82's profile

Finishing to Bring Out Figure

01-09-2017 09:02 PM by Cheapguy82 in Finishing

I watched a video recently where the guy said to really make any curl/figure ...

2 01-10-2017 06:58 PM
View skogie1's profile

spar varnish? urethane? epoxy? waterproofing interior countertop

12-30-2016 02:21 PM by skogie1 in Finishing

Hi all, need some help. I have a transition wall between the kitchen and the...

1 01-09-2017 02:55 AM
View Matthew 's profile

Need suggestions

12-31-2016 05:51 PM by Matthew in Finishing

Just made this little tea light holder out of walnut and I’m looking fo...

1 01-08-2017 02:56 PM
View Jerry's profile

Superior Sliding Bevel - Request for Information and Help

01-07-2017 07:45 PM by Jerry in Hand Tools

Okay, so the Superior Sliding Bevel, first engineered and produced by a Vermo...

10 01-08-2017 12:11 AM
View SamuelP's profile

Workamates of our Dreams

02-25-2012 11:40 PM by SamuelP in Hand Tools

A thread for that little helper who is always there when you need her. ...

332 01-06-2017 09:17 PM
View Fiddy's profile

Wormy Maple

12-24-2016 09:18 PM by Fiddy in Wood & Lumber

Today I got a load of wormy maple and what appears to be a good deal – ...

4 01-05-2017 03:23 PM
View Jack Lewis's profile

I would like to start a topic and invite EVERYONE to add to it, their experiences.

01-04-2017 12:26 AM by Jack Lewis in Woodworking Skill Share

This topic, I invite EVERYONE to add to it, their experiences. This probabl...

1 01-04-2017 05:09 AM
View papadan's profile

Wood stain?

01-02-2017 03:05 AM by papadan in Wood & Lumber

Why does everyone use so much stain on their projects? I have never and will ...

26 01-04-2017 04:37 AM
View Dan Hux's profile

Pecan wood

10-21-2009 06:55 PM by Dan Hux in Woodworking Skill Share

I don’t have a lot of experiense in woodworking and I’ve only pla...

13 01-04-2017 04:10 AM
View Andybb's profile

Waterborne finishes and sealers

12-30-2016 12:19 AM by Andybb in Finishing

I just made a picture frame with lacewood veneer, sealed with epoxy then oil ...

20 01-03-2017 11:54 PM
View kooldecker's profile

Danish oil on IPE?

01-03-2017 01:12 PM by kooldecker in Finishing

Hey everybody, hope all your holidays (whichever you choose to celebrate) wer...

2 01-03-2017 08:35 PM
View Brad Crudup's profile

Socket chisel handle from a broken sledgehammer

01-01-2017 08:39 PM by Brad Crudup in Hand Tools

Let me know what you think about how they turned out. Here is a video of ...

2 01-02-2017 11:00 PM

1 2 3 4 ... 88 next »
1756 topics


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com