Adj my Jet planer

  • Advertise with us

« back to Power Tools, Hardware and Accessories forum

Forum topic by russty posted 08-22-2009 05:06 PM 845 views 0 times favorited 1 reply Add to Favorites Watch
View russty's profile


45 posts in 3464 days

08-22-2009 05:06 PM

Thanks Jocks for the help in getting my jet planer

the feeders on my jet planer will not push wood through

-- With God's help all things are possible- even woodworking

1 reply so far

View Scott Bryan's profile

Scott Bryan

27250 posts in 3848 days

#1 posted 08-22-2009 06:56 PM

There are a couple of things I would try before doing anything drastic to the tool. With planers feed problems can come from a combination of dirty rollers or binding on the table. Clean the rollers by raising the cutterhead as high as it will go and wipe them off with a cotton rag and mineral spirits. With the bed a coat of wax may help the wood feed easier.

These are just a couple of simple things that you may have already tried but I would start with these before taking the planer apart.

-- Challenges are what make life interesting; overcoming them is what makes life meaningful- Joshua Marine

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics