LumberJocks

Cedar jewelry box

  • Advertise with us

« back to Finishing forum

Forum topic by AAANDRRREW posted 05-15-2015 01:56 AM 571 views 0 times favorited 4 replies Add to Favorites Watch
View AAANDRRREW's profile

AAANDRRREW

172 posts in 714 days


05-15-2015 01:56 AM

I have some extra cedar from a different project. Was thinking of trying my dado blade out for the 1st time making some box joints for a jewelry box. Problem I got is where do you get the felt stuff for the inside and those little cushions to put rings in?


4 replies so far

View BurlyBob's profile

BurlyBob

3966 posts in 1807 days


#1 posted 05-15-2015 02:02 AM

I bought a flocking kit from Woodcraft if that’s any help. You use an adhesive then squirt the ground felt into the box and shake it around the interior till it’s covered to your liking. As I recall it wasn’t to terribly expensive.

View thechipcarver's profile

thechipcarver

178 posts in 1119 days


#2 posted 05-15-2015 01:39 PM

Here is were I order my flocking (felt stuff):

http://www.flockit.com/

As for the inside guts of the boxes, I would try e-bay.

-- While teaching a class, a gentlemen once asked me: "When chip carving an intricate design, what do you do when you are almost finished and the wood breaks off?" I replied "Cover the kids ears."

View bondogaposis's profile (online now)

bondogaposis

4172 posts in 1892 days


#3 posted 05-15-2015 01:51 PM

You can get sticky back felt from any craft store. Not sure how they make those fabric covered ring cushions. I have made them using craft foam but they don’t look as nice as the fabric covered ones, perhaps fabric covered craft foam?

-- Bondo Gaposis

View Jim Finn's profile

Jim Finn

2447 posts in 2463 days


#4 posted 05-15-2015 09:29 PM



Here is were I order my flocking (felt stuff):

http://www.flockit.com/

As for the inside guts of the boxes, I would try e-bay.

- thechipcarver
I get my flocking there also.


-- "You may have your PHD but I have my GED and my DD 214"

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com