I have recently acquired a Bosch GTS 10 table saw and was wondering how to fit a set of dado blades I have from my former table saw, which had a spindle 5/8 of an inch in diameter.
The saw blade of the GTS 10 has a bore of 30 milimiters, but found out that this is the diameter of the seating in the inner flange, while the spindle (haven't measured it yet) is about 5/8 " in diameter.
Do I need a special set of flanges or some kind of adapter?
The saw blade of the GTS 10 has a bore of 30 milimiters, but found out that this is the diameter of the seating in the inner flange, while the spindle (haven't measured it yet) is about 5/8 " in diameter.
Do I need a special set of flanges or some kind of adapter?