Glue for pneumatic sanding sleaves

  • Advertise with us

« back to Woodworking Skill Share forum

Forum topic by Clement posted 08-09-2009 03:18 AM 852 views 0 times favorited 3 replies Add to Favorites Watch
View Clement's profile


21 posts in 3220 days

08-09-2009 03:18 AM

I was just setting up a couple of pneumatic sanding adaptors so that I could use them in my lathe, and probably because of age, the glue seem split wide open. It is a cloth backed paper. I was thinking about contact cement.

I was just wondering if any one has had success in reglueing them. The drum is about 2 1/2 in in diameter, and about 8 in. long.

If glueing is not the answer, then any idea about replacement sleaves. I don’t see any thing that size in Grizzly catalogue.

thanks in advance


-- Clement, from Longview in East Texas

3 replies so far

View a1Jim's profile


117091 posts in 3574 days

#1 posted 08-09-2009 03:32 AM

sorry I’ve never tried that but good luck

-- wood crafting & woodworking classes

View patron's profile


13603 posts in 3338 days

#2 posted 08-09-2009 03:42 AM

check out they got sanding sleeves in different sizes
i dont know about contact cement ,
it might get soft when it heats up .
there used to be a tube of sandpaper glue for that ,
but i don’t know where to get it now ,

good luck

-- david - only thru kindness can this world be whole . If we don't succeed we run the risk of failure. Dan Quayle

View lew's profile


12056 posts in 3752 days

#3 posted 08-09-2009 04:13 PM

I have been buying my sanding sleeves here:

-- Lew- Time traveler. Purveyor of the Universe's finest custom rolling pins.

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics