LumberJocks

Holding small parts on Drill Press

  • Advertise with us

« back to Power Tools, Hardware and Accessories forum

Forum topic by niki posted 09-07-2007 06:40 PM 2329 views 6 times favorited 9 replies Add to Favorites Watch
View niki's profile

niki

426 posts in 2827 days


09-07-2007 06:40 PM

Good day

When I had to drill wheels (knobs) and small parts, I used hold-down clamps and other combinations that where “big” on the small wheels…but, no more…

The idea came from other shop-aid that I made for cutting small pieces on the table saw…so, why not on the Drill-Press.

So now, the DP table is clean from all the clamps and hold-downs and here it is…

Best Regards
niki

Photo Sharing and Video Hosting at Photobucket

Photo Sharing and Video Hosting at Photobucket

Photo Sharing and Video Hosting at Photobucket

Photo Sharing and Video Hosting at Photobucket

Photo Sharing and Video Hosting at Photobucket

Photo Sharing and Video Hosting at Photobucket

Photo Sharing and Video Hosting at Photobucket

Photo Sharing and Video Hosting at Photobucket

Photo Sharing and Video Hosting at Photobucket

Photo Sharing and Video Hosting at Photobucket

Photo Sharing and Video Hosting at Photobucket

Photo Sharing and Video Hosting at Photobucket

Photo Sharing and Video Hosting at Photobucket

Photo Sharing and Video Hosting at Photobucket

Photo Sharing and Video Hosting at Photobucket

Photo Sharing and Video Hosting at Photobucket

Photo Sharing and Video Hosting at Photobucket

Photo Sharing and Video Hosting at Photobucket

Photo Sharing and Video Hosting at Photobucket

Photo Sharing and Video Hosting at Photobucket

Photo Sharing and Video Hosting at Photobucket

Photo Sharing and Video Hosting at Photobucket

Photo Sharing and Video Hosting at Photobucket


9 replies so far

View mot's profile

mot

4911 posts in 2783 days


#1 posted 09-07-2007 07:07 PM

Go Niki! Go Niki! Go Niki!

-- You can discover more about a person in an hour of play than in a year of conversation. (Plato)

View TomFran's profile

TomFran

2942 posts in 2741 days


#2 posted 09-07-2007 07:10 PM

Niki,

I like this. I am definitely going to make one of these small parts holder jigs!

How about a few dimensions ;^D

Thank You!

-- Tom, Surfside Beach, SC - Romans 8:28

View MsDebbieP's profile

MsDebbieP

18615 posts in 2908 days


#3 posted 09-07-2007 07:31 PM

well look at that!!! Cool

-- ~ Debbie, Canada (https://www.facebook.com/DebbiePribeleENJOConsultant)

View niki's profile

niki

426 posts in 2827 days


#4 posted 09-07-2007 07:46 PM

Thank you so much for your kind compliments

Mot
Tom, English is not my first language so…when you said “Go niki”...did you mean that I’ll GO from here???...just joking, thank you.

TomFran
I found that one can cover many dimensions, if you will need something bigger or smaller, it’s just to cut a “V” on another scrap…the sanding paper is not so imported…it’s just that I, probably love everything with sanding paper.

Thanks again
niki

View Dadoo's profile

Dadoo

1776 posts in 2737 days


#5 posted 09-08-2007 10:40 PM

I really like how you went to such an extent to photograph and demo this idea. That was a lot of work. Good job Niki. I’ll definately keep this idea in the back of my head for when the need arises.

-- Bob Vila would be so proud of you!

View brunob's profile

brunob

2277 posts in 2916 days


#6 posted 09-08-2007 11:11 PM

Yep, this could be a keeper!

-- Bruce from Central New York...now, if you'll pardon me, I have some sawdust to make.

View Thos. Angle's profile

Thos. Angle

4438 posts in 2709 days


#7 posted 09-08-2007 11:12 PM

You do some great stuff, Niki. English might not be your first language but you certainly communicate well. Great jigs.
The other Tom was being a cheer leader. Ya-Ra.
Tom
I guess all the Tom’s are fans.

-- Thos. Angle, Jordan Valley, Oregon

View niki's profile

niki

426 posts in 2827 days


#8 posted 09-08-2007 11:46 PM

Thank you so much for your kind compliments

...And exactly when I clicked “post this reply”...my Internet connection fall down…

Dadoo
Most of the work was actually in front of the computer…adding text to the picture…

Best regards
niki

View KenHMT's profile

KenHMT

9 posts in 764 days


#9 posted 12-18-2012 06:20 PM

Absolutely brilliant! What a great solution for clamping small parts…

Added to the homemadetools.net database: http://www.homemadetools.net/small-parts-holder-for-a-drill-press

Ken

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase