Looking for wide Walnut in PA, OH, VA.

  • Advertise with us

« back to Woodworking Trade & Swap forum

Forum topic by poroskywood posted 07-14-2009 07:04 PM 1558 views 0 times favorited 8 replies Add to Favorites Watch
View poroskywood's profile


618 posts in 3359 days

07-14-2009 07:04 PM

I got a customer who needs 4/4 Black walnut 10” and wider 12’ long about 1000’ feet. Green is fine. Believe it or not I’ve found some. Wondering if any LJ’s new some smaller mills in this region who may be able to come up with this. Rustic quality is fine, it’s basically a width and length thing.

-- There's many a slip betwixt a cup and a lip.--Scott

8 replies so far

View teenagewoodworker's profile


2727 posts in 3763 days

#1 posted 07-14-2009 07:11 PM

View lew's profile


12055 posts in 3750 days

#2 posted 07-14-2009 08:04 PM

Hicksville Planing Mill in Clear Springs Maryland

-- Lew- Time traveler. Purveyor of the Universe's finest custom rolling pins.

View Greg Wurst's profile

Greg Wurst

794 posts in 3827 days

#3 posted 07-14-2009 09:04 PM

Couple possibilities:

-- You're a unique and special person, just like everyone else.

View SUPERDOG683's profile


36 posts in 3121 days

#4 posted 11-06-2009 06:52 PM

can fill that order.
about 2-2.50/board foot depending on the quality.
2 for fas
2.50 fas clear
not sure if i can get 1000 foot.
can get close
i am located mid east pa 20 miles from ohio inbetween erie and pgh
grove city pa 16127
have ash
about 1.50/bf
wide cherry 20-30 inch 2-2.50 bf
about 2 yrs old but still green

View Rabbet's profile


35 posts in 3136 days

#5 posted 11-07-2009 07:37 AM

Hey SUPERDOG683, can you ship to California?

View RBWoodworker's profile


441 posts in 3347 days

#6 posted 11-08-2009 01:27 AM

Yea!! can you ship to Calif??

-- Randall Child

View SUPERDOG683's profile


36 posts in 3121 days

#7 posted 11-17-2009 01:55 AM

i dunno, sounds like a hasle, but i like to do stuff for people
when i can, never know when i might need something.
who do ya use for heavy stuff like lumber??
how much do you want??
i am just one guy redoing some old houses.
so i cant get envolved in anything major. dont have time.
but if you want some pictures
and looking for smaller quanity.
1000 bf is the most i could supply (walnut)
but a couple other woods might be getting a little quanity.
i would think the shipping cost would make things expensive.
but if anyone is near grove city pa and want to get something that would be more ideal.

View SUPERDOG683's profile


36 posts in 3121 days

#8 posted 11-27-2009 04:45 PM

note changed my mind, this wood is not dry enough. i brought some cherry boards inside
several weeks back and they dried and checked too fast. so i cant control the shipping environment.
i could send the boards in good condition and if the shipping container is very dry
they might arrive in poor condition. if some one is local i can sell alittle for pickup
but it appears i will use most of the wood.
tx don

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics