LumberJocks

Saw blade suggestions

  • Advertise with us

« back to Power Tools, Hardware and Accessories forum

Forum topic by dschlic1 posted 04-05-2015 06:02 PM 861 views 0 times favorited 5 replies Add to Favorites Watch
View dschlic1's profile

dschlic1

330 posts in 1429 days


04-05-2015 06:02 PM

Topic tags/keywords: question tablesaw

I am looking for an inexpensive blade for my table saw with a 0.125” kerf and a flat (non ATB) top. I am currently use two Diablo saw blades (which are excellent) however even the 24 tooth rip blade is thin kerf and ATB. I want a flat top blade to cut some flat bottom (without “bat wings”) grooves for an upcoming project.

Thanks to all in advance


5 replies so far

View knotscott's profile

knotscott

7207 posts in 2835 days


#1 posted 04-05-2015 06:11 PM

There are 3 that fit your criteria in my bargain blade blog:
http://lumberjocks.com/knotscott/blog/36699

-- Happiness is like wetting your pants...everyone can see it, but only you can feel the warmth....

View bondogaposis's profile

bondogaposis

4020 posts in 1810 days


#2 posted 04-05-2015 09:07 PM

These are good. Not sure what your definition of cheap is.

-- Bondo Gaposis

View Oughtsix's profile

Oughtsix

42 posts in 634 days


#3 posted 04-07-2015 03:21 AM

I have used Harbor Freight blades on my chop saw for installing pre-finished engineered flooring and they worked great. There is no way I wanted to ruin my expensive Freud blades on that silicone impregnated hardwood flooring.

View dschlic1's profile

dschlic1

330 posts in 1429 days


#4 posted 04-07-2015 06:20 PM

From knotscott I have three possibilities:
Delta Industrial 35-611
Bosch PRO1024RIPB
Kempston 99312

The Freud industrial blades are bit over what I am willing to pay.

Oughtsix which HF blades have a flat grind?

View Rick's profile

Rick

8287 posts in 2492 days


#5 posted 04-08-2015 03:22 AM

I bought this one about a month ago at Home Depot (Canada) about $42.00. For my Table Saw but will also fit my Mitre Saw.

Model D1050X, 5/8” Arbor, 50 Tooth Alternate Top Bevel, Kerf .098, Hook Angle 15 Degrees, Combination Blade. (Also mentioned in “knotscott’s” blog, as shown above)

Very pleased with it. Cuts very cleanly with very little effort and for some reason it runs very quietly.

-- Hope Everyone Is Doing Well! .... Best Regards: Rick

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com