Edwards Vacume Pump

  • Advertise with us

« back to Woodworking Trade & Swap forum

Forum topic by MLK posted 06-22-2009 10:54 PM 1610 views 1 time favorited 8 replies Add to Favorites Watch
View MLK's profile


77 posts in 3234 days

06-22-2009 10:54 PM

I have an almost brand new Edwards’s vacuum pump model E2MO.7 that I plan on using for veneering but never got around to it so it’s sitting in my shed collecting dust. This pump is a commercial grade pump and sells new for around $1,400 can be checked out on e-bay at the link below.

Would be willing to either sell or trade

8 replies so far

View Karson's profile


35032 posts in 3823 days

#1 posted 06-22-2009 11:03 PM

Mike a great looking pump. I’d suggest that you get your vacuum veneering set up working. It’s a lot of fun.

-- I've been blessed with a father who liked to tinker in wood, and a wife who lets me tinker in wood. Southern Delaware soon moving to Virginia †

View SCOTSMAN's profile


5839 posts in 3008 days

#2 posted 06-22-2009 11:16 PM

Watch ebay at the moment things are sometimes going for next to nothing, practically getting stolen at those prices. Sorry but please becareful that’s even if you get a bid at least here in the uk that’s how it is. I have never seen things go so low. I saw an engineers lathe just like mine sell two years ago for Just over four thousand pounds almost new these things cost new aroung forty thousand last week the same lathe went for five hundered pounds sterling, some of the acessories were worth more than that alone . So just a friendly warning I hope it does well I had one much the same as yours left over from dental days and I got three hundred and fifty for it about five years ago,it was worth about seventeen hundred new.So anyway just be careful you don’t lose out.Alistair

-- excuse my typing as I have a form of parkinsons disease

View MLK's profile


77 posts in 3234 days

#3 posted 06-23-2009 04:27 AM

Scotsman thanks for your information but I don’t have this pump listed on E-Bay and I don’t intend to, I only used E-Bay as an example for anyone who is not familiar with the quality of this pump, and what you say is very true. Right now it’s setting in my shed and I drought that I will ever use it for veneering as I planed. I rather sell it to a fellow woodworker that will put it to good use then to someone on E-Bay.

View RBWoodworker's profile


432 posts in 2775 days

#4 posted 08-22-2009 08:19 PM

Hi.. Is this pump stil available? I am ooking to set up a veneering system and am looking to buy the bags and pumps..please let me know.. Thank you kindly

-- Randall Child

View Drewskie's profile


53 posts in 2678 days

#5 posted 08-22-2009 09:14 PM

If you guys are into vacuum veneering you have to check out, it is by fare the best DIY vacuum veneering site. They have all the parts, plans and instructions to get totally set up.

-- I cut it three times and its still to short?

View RBWoodworker's profile


432 posts in 2775 days

#6 posted 08-22-2009 09:24 PM

Thanks for the info drewskie..I planned on seeing if this pump was still available..and buy the bags and hoses from the veneersystems.. I know absolutely nothing about using one..and have done all of my veneering via contact cement and a roller..but I want to move up and learn to use the bags..I hear its just a lot better to do it that way..

-- Randall Child

View jockmike2's profile


10635 posts in 3670 days

#7 posted 08-22-2009 09:24 PM

So what do you want in money or trade. I got a crap load of everything. How about a good almost new Delta Lathe. I just picked up at an auction. It’s a Delta 1440 Bedstock. Has a rotating head about 40” in bed, only thing wrong is I broke the speed handle loading it to bring it home. Probably a 25.00 dollar part easy fix. Retails $800.00. Weight might be a problem. Weighs about 250 lbs.

-- (You just have to please the man in the Mirror) Mike from Michigan -

View MLK's profile


77 posts in 3234 days

#8 posted 08-22-2009 10:40 PM

Thanks for all the intrest, but the pump was sold

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics