LumberJocks

Inherited a Practically New Delta 34-670...

  • Advertise with us

« back to Power Tools, Hardware and Accessories forum

Forum topic by aMomentOfScience posted 03-18-2015 02:58 PM 673 views 0 times favorited 5 replies Add to Favorites Watch
View aMomentOfScience's profile

aMomentOfScience

3 posts in 1000 days


03-18-2015 02:58 PM

... and I’ve purchased the Delta 36-T30 fence. I am trying to find the saw that it is a “Plug n Play” with RE: TS top dimensions and am having a very difficult time finding it. If anyone happens to know off the top of their head and could pass that information along I would be extremely grateful. Thanks in advance for any help.

-- "Never attribute to malice that which can be adequately explained by stupidity"


5 replies so far

View knotscott's profile

knotscott

7207 posts in 2835 days


#1 posted 03-18-2015 03:33 PM

Sorry for a being a little thick, but are you asking specifically for the table dimensions of the 34-670?

-- Happiness is like wetting your pants...everyone can see it, but only you can feel the warmth....

View TheFridge's profile

TheFridge

5764 posts in 946 days


#2 posted 03-18-2015 04:15 PM

drill holes on an old saw isn’t hard at all.

-- Shooting down the walls of heartache. Bang bang. I am. The warrior.

View aMomentOfScience's profile

aMomentOfScience

3 posts in 1000 days


#3 posted 03-18-2015 06:16 PM

Scott… actually I am trying to determine the dimensions of whatever saw the 36-T30 bolts directly up to so I can build out my table (MDF) to that size so as to best fit the fence system. Depth (front to back) is the main dimension I am looking for. The 34-670 table is only 22” deep (if memory serves) and the fence is clearly made for a significantly deeper table. I was able to determine that the fence seems to be made for the Unisaw and the 5000 series saws after I posted this. But I am still curious the table depth that it is designed to be used on without any modification to the fence and namely the clip that grabs on the rear rail. (the outfeed side past the blade)

Fridge… You are correct. I have the angle iron bolted to the stamped steel extension wings temporarily and drilling the holes to do that was no task whatsoever.

Thanks to you both for the replies, gentlemen!

-- "Never attribute to malice that which can be adequately explained by stupidity"

View knotscott's profile

knotscott

7207 posts in 2835 days


#4 posted 03-18-2015 06:27 PM

The depth of standard full size table saw is 27”. In case it helps, here’s a link to a post from a guy who put the same fence on the same saw.
http://lumberjocks.com/topics/34712

-- Happiness is like wetting your pants...everyone can see it, but only you can feel the warmth....

View aMomentOfScience's profile

aMomentOfScience

3 posts in 1000 days


#5 posted 03-18-2015 11:27 PM

Thanks for the link, Scott! I’m sure this information will come to be quite useful.

-- "Never attribute to malice that which can be adequately explained by stupidity"

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com