Anyone seen one of these?

  • Advertise with us

« back to Power Tools, Hardware and Accessories forum

Forum topic by sIKE posted 06-14-2009 07:36 PM 1437 views 0 times favorited 12 replies Add to Favorites Watch
View sIKE's profile


1271 posts in 3175 days

06-14-2009 07:36 PM

Topic tags/keywords: question panel saw

This looks interesting….

-- //FC - Round Rock, TX - "Experience is what you get just after you need it"

12 replies so far

View a1Jim's profile


115177 posts in 2998 days

#1 posted 06-14-2009 08:02 PM

Looks pretty good and reasonably priced to

-- Custom furniture

View patron's profile


13524 posts in 2762 days

#2 posted 06-14-2009 08:08 PM

ditto with jim ,
i’ve been looking at various brands , but this looks good .

-- david - only thru kindness can this world be whole . If we don't succeed we run the risk of failure. Dan Quayle

View Scott Bryan's profile

Scott Bryan

27251 posts in 3243 days

#3 posted 06-14-2009 08:27 PM

Your are right, sIKE this does look like a nice tool that a lot of us could use to handle full sized sheet goods.

-- Challenges are what make life interesting; overcoming them is what makes life meaningful- Joshua Marine

View lew's profile


11265 posts in 3177 days

#4 posted 06-14-2009 08:35 PM

I remember reading about how to make one of these in an old “Shop Notes” magazine. I don’t rmember if they quoted a price for the project.

-- Lew- Time traveler. Purveyor of the Universe's finest custom rolling pins.

View sIKE's profile


1271 posts in 3175 days

#5 posted 06-14-2009 08:40 PM

I have that issue also, i estimated the cost of materials and parts at about $300 and then the time and effort.

-- //FC - Round Rock, TX - "Experience is what you get just after you need it"

View Michael Clark's profile

Michael Clark

28 posts in 2745 days

#6 posted 06-14-2009 08:51 PM

Would a track saw and an A frame do the same job? Of course, if you don’t have the track saw, it would probably run about the same price.

-- Sometimes... At night... My router tells me to do things to wood. Bad Things.

View sIKE's profile


1271 posts in 3175 days

#7 posted 06-14-2009 11:01 PM

Don’t forget about the lifting part…

-- //FC - Round Rock, TX - "Experience is what you get just after you need it"

View mmh's profile


3664 posts in 3144 days

#8 posted 06-15-2009 05:25 PM

I think I’ve seen this or a similar one used at Home Depot for custom cut pieces of plywood. If you have a HD near you take a look, it’s usually in the back area of the store.

-- "They who dream by day are cognizant of many things which escape those who dream only by night." ~ Edgar Allan Poe

View Tornado's profile


3 posts in 2687 days

#9 posted 06-17-2009 10:39 PM

I have used one of these and it works very well. It sure beats trying to cut a full sized sheet of OSB on my table saw. I believe the company that makes this is Safety Speed Cut. They market this unit to the home hobbyist but manufacture a full line of panel saws and other woodworking equipment. The price seems very reasonable at $799.

View DesignEmpire's profile


1 post in 2686 days

#10 posted 06-18-2009 02:13 AM

Many thanks for the heads up sIKE


View Teaza's profile


19 posts in 2689 days

#11 posted 06-18-2009 02:36 AM

I have that issue of Shop notes in PDF format, as long as its not in violation of any type of copyright laws, I have no clue about legalities with these things, I will gladly send you the excerpt of how to build a panel saw.

Let me know if you want it :)

-- Honey... I need to buy a tool to build you a present!

View Elaine's profile


113 posts in 3044 days

#12 posted 06-20-2009 03:30 PM

fine woodworking has a plan on line, go here has a plan to purchase on line and there are other sources if you google “build a panel saw”

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics