LumberJocks

Delta Table Fence

  • Advertise with us

« back to Power Tools, Hardware and Accessories forum

Forum topic by Trombly posted 06-07-2009 10:01 PM 9788 views 0 times favorited 11 replies Add to Favorites Watch
View Trombly's profile

Trombly

4 posts in 2736 days


06-07-2009 10:01 PM

Hey guys I just got a Delta Tablesaw 34-670 but it doesnt have a blade guard or fence, just wondering where are what I need to get to replace them.
For the fence I found this: Delta T2 fence
http://www.tools-plus.com/delta-36-t30.html?utm_medium=feed&utm_source=froogle&utm_term=DEL36-T30 (will this work?)

Thanks


11 replies so far

View Francisco Luna's profile

Francisco Luna

938 posts in 2854 days


#1 posted 06-07-2009 10:05 PM

Does the saw have the front rail?
any pics?

-- Nature is my manifestation of God. I go to nature every day for inspiration in the day's work. I follow in building the principles which nature has used in its domain" Frank Lloyd Wright

View ajosephg's profile

ajosephg

1878 posts in 3022 days


#2 posted 06-07-2009 11:15 PM

The Delta T2 is a great fence and is 10x better than the original fence that came with the 34-670.

“Some assembly required” There are several projects on this site that tells you how.

-- Joe

View 747DRVR's profile

747DRVR

199 posts in 2818 days


#3 posted 06-08-2009 12:59 AM

The T2 is considered a very good fence for the money

View knotscott's profile

knotscott

7209 posts in 2837 days


#4 posted 06-08-2009 02:25 AM

Very nice fence in that price range. You might even find it cheaper at Lowes if they still have them. Amazon is another possibility.

I’m not certain that the 34-670 is a standard full size cast iron contractor saw…I’m thinking it may be a predecessor to the 36-600 and current TS300 “compact saws” that are 22” deep vs the standard 27” deep. The T2 fence may fit either way, but it’s worth checking into before spending the $.

-- Happiness is like wetting your pants...everyone can see it, but only you can feel the warmth....

View Chris Wright's profile

Chris Wright

540 posts in 2942 days


#5 posted 06-08-2009 02:37 AM

I don’t see why it wouldn’t work, they are both Delta products. If the holes in the rail don’t line up with the holes in top, you should be able to drill new ones.

-- "At its best, life is completely unpredictable." - Christopher Walken

View Trombly's profile

Trombly

4 posts in 2736 days


#6 posted 06-09-2009 02:59 AM

View ajosephg's profile

ajosephg

1878 posts in 3022 days


#7 posted 06-09-2009 04:29 AM

The T2 comes with with new “rails.” The rails shown in your photos get removed and repurposed.

It’s a piece of cake.

-- Joe

View Trombly's profile

Trombly

4 posts in 2736 days


#8 posted 06-09-2009 04:55 PM

Thanks, probably should have read the description :p
Is there any way I could get a blade guard?
Thanks

View ajosephg's profile

ajosephg

1878 posts in 3022 days


#9 posted 06-10-2009 03:32 AM

Don’t tell the safety police, but I quit using a blade guard years ago. My saw isn’t a Delta, but it has a similar guard, and I felt it was more dangerous with a guard than without.

So I just use extreme caution and watch and listen to what is going on.

-- Joe

View Trombly's profile

Trombly

4 posts in 2736 days


#10 posted 06-11-2009 07:18 AM

One last question (I think)

What and where could I get new bearings?
Sorry for all the questions.

Thanks guys

View kerflesss's profile

kerflesss

182 posts in 2829 days


#11 posted 06-11-2009 09:20 AM

Pull your bearings and take em down to your local industrial bearing shop to avoid the shipping. Paid $7.00 for mine but depends, where you are located. This usually an off the shelf item. Check yellow pages.

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com