David Barron dovetail hammer question

  • Advertise with us

« back to Hand Tools forum

Forum topic by kooldecker posted 02-28-2015 04:56 AM 642 views 0 times favorited 1 reply Add to Favorites Watch
View kooldecker's profile


59 posts in 985 days

02-28-2015 04:56 AM

Hey guys i was thinking about crafting one of those nifty little dovetail hammers that david barron uses and sells. Not that im cheap….cause i am…...but i like makin my own stuff better. Anyway was wondering if anybofy has made one on here before, and what were your dimensions. Mainly om interested in how big the handle swell turned out to be. Im pretty sure 1 1/4 brass stock would do the trick right? Thanks for any input you may shavings!

-- " I dont understand......I cut that board AT LEAST 4 times and its STILL too short!"

1 reply so far

View Rick M.'s profile

Rick M.

7668 posts in 1797 days

#1 posted 03-01-2015 09:29 PM

He makes the heads from 32mm or 1-1/4” brass rod, the handle is about 40mm (1-9/16”) at the heel, and 16mm at the head.


Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics