Is there a router Bit or Bits

  • Advertise with us

« back to Power Tools, Hardware and Accessories forum

Forum topic by goochs posted 02-25-2015 06:21 PM 824 views 0 times favorited 5 replies Add to Favorites Watch
View goochs's profile


57 posts in 1374 days

02-25-2015 06:21 PM

Topic tags/keywords: rug hooping gripper router bit

I am making a hooping frame and was wondering if anyone knows of a router bit or bits that would make this profile? Or possible a molding or something already made.

5 replies so far

View Ghidrah's profile


667 posts in 1367 days

#1 posted 02-25-2015 06:35 PM

What’s a rug hooping frame? If the length is 1 1/4” what is the hgt? I can see the profile constructed in 2 pieces but that looks like one piece. The base with a set of molder knives and the top with a bull nose bit and glued to the base.

-- I meant to do that!

View goochs's profile


57 posts in 1374 days

#2 posted 02-25-2015 10:04 PM

the width of the board is 1 1/2 inches, length is 12” and height is 1/2 inch. They use these to make fancy rugs. That strip is 300ppi real pointy like needles that grabs the base of the rug being made. Here are a few more pictures.

View pjones46's profile


1001 posts in 2787 days

#3 posted 02-27-2015 03:45 PM

More than likely the shape was made using a shaper/molder with specially ground blades/cutters in one pass.

-- Respectfully, Paul

View Ghidrah's profile


667 posts in 1367 days

#4 posted 02-28-2015 12:10 AM

The profile footprint can be made with a molder knife set but it can’t cut the slots, they’d need to be cut after the fact. Maybe stand it up and cut it with a thin kerf saw blade, 15 20°

-- I meant to do that!

View ohtimberwolf's profile


862 posts in 2497 days

#5 posted 02-28-2015 03:41 PM

For those who (like me) had no idea what a frame of this type was like here is a link to several good pictures. Click on them and they enlarge. Seems like there should be an easier way to do that job of holding the rug in place. larry

-- Just a barn cat, now gone to cat heaven.

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics