LumberJocks

Glue

  • Advertise with us

« back to Woodworking Skill Share forum

Forum topic by fisherdoug09 posted 02-25-2015 12:56 AM 650 views 0 times favorited 11 replies Add to Favorites Watch
View fisherdoug09's profile

fisherdoug09

121 posts in 2142 days


02-25-2015 12:56 AM

Hello to all Lumber Jocks, quick question. What kind of glue does everyone use to glue up cutting boards.? I know it must be water proof just wondered what is the best. Thanks


11 replies so far

View sedcokid's profile

sedcokid

2715 posts in 3066 days


#1 posted 02-25-2015 01:05 AM

I use tight bond lll

-- Chuck Emery, Michigan,

View sskwoodcraft's profile

sskwoodcraft

128 posts in 912 days


#2 posted 02-25-2015 01:07 AM

I prefer the Titebond 2 Premium Wood Glue. It’s very water resistant and has a set time long enough for you to make any adjustments.

-- If nothing goes right go left.

View waho6o9's profile

waho6o9

7180 posts in 2044 days


#3 posted 02-25-2015 01:17 AM

Tite Bond III, right now I have a gallon of the TBII but haven’t

made a cutting board with it yet.

Here’s how to read the date code:

Our current lot numbering system is a 10 digit code. The format is: aymmddbat#. The “a” stands for Made in the U.S.A. The “y” is the last digit of the year of manufacture. Digits “mm” represent the month, and “dd” represent the day of the month. The final four digits represent the batch number used for quality control purposes. Therefore, a product with the lot number A104270023 was manufactured on April 27, 2011.

View goochs's profile

goochs

56 posts in 697 days


#4 posted 02-25-2015 01:21 AM

I use titebond 2 and 3 and sometimes gorilla glue

View DrDirt's profile

DrDirt

4169 posts in 3210 days


#5 posted 02-25-2015 01:37 AM

I used DAP/Weldwood plastic resin glue…. the powder mixed with water, same stuff that I use for laminating curves.

I avoid Gorilla Glue (polyurethane)

-- 'Political correctness is fascism pretending to be manners' ~George Carlin

View Ghidrah's profile

Ghidrah

667 posts in 690 days


#6 posted 02-25-2015 04:49 AM

I prefer Gorilla glue for anything outside, the expansion may be a pain to clean up but I believe its worth it, it fills in any and all voids.

-- I meant to do that!

View pintodeluxe's profile

pintodeluxe

4859 posts in 2281 days


#7 posted 02-25-2015 05:06 AM

TBII on oak and cherry, and TBIII on walnut and applications where water resistance is beneficial, such as cutting boards.

-- Willie, Washington "If You Choose Not To Decide, You Still Have Made a Choice" - Rush

View TheWoodenOyster's profile

TheWoodenOyster

1275 posts in 1403 days


#8 posted 02-25-2015 12:50 PM

TB3

-- The Wood Is Your Oyster

View JoeinGa's profile

JoeinGa

7489 posts in 1475 days


#9 posted 02-25-2015 12:57 PM

Put me in with the Titebond III group :-)

-- Perform A Random Act Of Kindness Today ... Pay It Forward

View JeffP's profile

JeffP

573 posts in 859 days


#10 posted 02-25-2015 01:07 PM

I just grew weary of wondering why there is more than one kind of titebond in existence at the same time. Went to their website and found a good page explaining all the details…and I still don’t know why they still sell the older stuff.

For the curious:
http://www.titebond.com/Libraries/LiteraturePDFs/FF683_GlueGuideTB.sflb.ashx

-- Last week I finally got my $*i# together. Unfortunately, it was in my shop, so I will probably never find it again.

View bondogaposis's profile

bondogaposis

4037 posts in 1819 days


#11 posted 02-25-2015 01:12 PM

TB 3

-- Bondo Gaposis

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com