Full size furniture plans

  • Advertise with us

« back to Woodworking Skill Share forum

Forum topic by Betsy posted 05-04-2009 05:20 AM 2273 views 0 times favorited 10 replies Add to Favorites Watch
View Betsy's profile


3391 posts in 3895 days

05-04-2009 05:20 AM

Topic tags/keywords: furniture plans

Just curious of everyone’s favorite vendor for full sized furniture plans? I’m hoping that we can get a few new vendors listed.

Thanks in advance.

-- "Our past judges our present." JFK - 1962; American Heritage Magazine

10 replies so far

View Todd A. Clippinger's profile

Todd A. Clippinger

8901 posts in 4099 days

#1 posted 05-04-2009 05:22 AM

It’s all in my head:^)

-- Todd A. Clippinger, Montana,

View a1Jim's profile


117091 posts in 3576 days

#2 posted 05-04-2009 05:22 AM

Sorry I make my own plans

-- wood crafting & woodworking classes

View Betsy's profile


3391 posts in 3895 days

#3 posted 05-04-2009 05:24 AM

Wish I could do that. My designs are less than good. Give me a good plan and there’s pretty good chance that I can build whatever it is. But if I have to figure out all the ins=and outs of a design – I’m lost.

-- "Our past judges our present." JFK - 1962; American Heritage Magazine

View lew's profile


12061 posts in 3755 days

#4 posted 05-04-2009 06:35 AM


Made this a while back. The plans were OK.


-- Lew- Time traveler. Purveyor of the Universe's finest custom rolling pins.

View WWilder's profile


31 posts in 3527 days

#5 posted 05-04-2009 11:03 AM

I have bought the adorandack set from woodcraft also, good plans. Here is another site I know of: I am still learning so plans are a great help for me

-- my mind is constantly racing..... but it hasnt came in 1st place yet

View Woodchuck1957's profile


944 posts in 3763 days

#6 posted 05-04-2009 01:59 PM

I’ve only bought one set of plans as long as I’ve been woodworking, Norm’s plans for a Lutchens bench. I never did use the plans because I found a Lutchens bench cheaper than I could of bought the wood for.

View Betsy's profile


3391 posts in 3895 days

#7 posted 05-05-2009 04:48 AM

Thanks for the tips.

-- "Our past judges our present." JFK - 1962; American Heritage Magazine

View Crash1's profile


1 post in 3308 days

#8 posted 05-05-2009 06:50 PM

big help


View griph0n's profile


68 posts in 3342 days

#9 posted 05-05-2009 07:42 PM

I really like these:

FWW looks good. I’ve never used their plans, but the video workshops have helped when my project has even a remote resemblance to theirs. Installing the twin screw video on their workbench project had some great ideas. They are short but sweet. I never really do it the way they do, but for some reason I feel better having seen them.???? May need a paid membership, easily worth the money:

View kimball's profile


323 posts in 3297 days

#10 posted 05-28-2009 06:13 PM

If I were you, I would buy some 4’ x 8’ layout board (card stock) and make my own. This will give you an idea of the problems that you will face and may suggest solutions at the same time.
Good luck’

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics